(Photos by Dave Nutting) – I spend lots of time telling you to get out there and do stuff with your car. Whether it be the drags, cruising, the road course, or autocrossing, I’m constantly harping on you to ditch the couch and burn some tire. Unlike other places that like to talk and talk [...]
(Photos by Dynotech Engineering and the Author) – At its base, hot rodding has always been about trying stuff, breaking stuff, fixing stuff, and getting better, faster, and stronger along the way. That’s been the case with the 1987 Caprice Buford T Justice project thus far as I’ve taken the worn out stock suspension and [...]
Well I celebrated Buford’s one year anniversary in fine style last week by finally getting back to wrenching on the car. The weather has broken, Spring is here, and I found both of my kids when the snow banks melted. Life is very good! If you have been following the saga of Buford T Justice, [...]
In our never ending quest for putting together a nice, comfortable, and capable tow rig, without spending piles of cash, and without having a new car payment, we continue to thrash on the $200 Hauler 2000 Chevrolet Suburban. Since it’s theft and recovery, we’ve gotten the interior back to almost good shape again, and have [...]
(Photos by Dave Nutting) – So it has been a while since you’ve seen anything with respect to our much beloved project Buford T Justice Caprice. What the Hell, right? We can assure you that nothing underhanded is going on and that we’re actually on a short holding pattern until we return to the dyno [...]
During the refresh of our $200 Hauler Suburban Project you have seen us give it a wrap thanks to the folks at The Shirt Shak, along with a new grille, billet bowtie, rear bumper, trim, and more from LMC Trucks. We’ve also had the stupid thing stolen, have recovered it, and patched it back together. [...]
So first, I’ll lead with an apology. This update was supposed to run last week but a blizzard and a bunch of other stuff jumped up and caused the delay. With the amount of email, text, forum, and other messages I got from fans of the Buford T Justice 1987 9C1 Caprice I knew that [...]
Last week I installed the cylinder heads, COMP lifters, rockers, pushrods,and LS lifter guides into Buford’s small block mill. While all that was nice, we still had a massive problem on our hands with the discovery of the huge crack in the bell housing of the TH350 that had been in the car since the [...]
Our weekly Buford updates continue! When last we left you, Dana Hard and Jon Wall at Custom Automotive Machine in Weymouth, Massachusetts had just finished working on the 083 cylinder heads for the 350 (actually 357ci with the .040 over bore) in Buford T Justice. John Engstrom had notched and braced the factory cross member [...]
As promised, we’re back with another update of Project Buford T Justice, our 1987 9C1 Caprice. In the last installment we took the car to the dyno and thrashed all day bolting on more than 20hp at the tires with ignition upgrades, a new intake, and a new carb. Returning home from the dyno, we [...]
(Photos by Dave Nutting) – Buckle up kids, ’cause we’re going for a long ride. If you remember a couple of months back, we had a grand plan of hitting the drag strip, and then the chassis dyno with a pile of parts in full attack mode to do a one day total make over [...]
We know that you’ve been wondering what the hell happened to Buford T Justice since our last proclamation about heading to the dyno to pile parts onto the old ol’ 350 under the hood and crank things up in the steam department. We know that you’ve been thinking we slipped on a banana peel, blew [...]
We had the parts, the car, the tools, and the rough plan. Mother Nature had the upper hand. A couple of Sundays back we left well before daylight broke with Buford T Justice on the trailer, heading for New England Dragway in Epping, NH for our parts install drag strip flog-a-palooza. We got the strip, [...]
(Photos by Dave Nutting and the author) – So last we left you, Buford T Justice had quit running on us twice during some mundane cruising action around town. The first time the car shut down we determined that the ignition coil had walked off the job. Enlisting the help of local pal Jon Wall [...]
We’ve been piling up the miles on Buford T Justice, our 1987 Chevy Caprice project recently. Having completed the suspension upgrade and installed the new wheels and tires, the thing is a riot to heave into the corners and scare the kids, passengers, and passers by with. That being said, there was still a nagging [...]
(Photos by Dave Nutting and the author) – Last we left you, Project Buford T Justice was sitting on all four tires suspended by a complete Hotchkis Sport Suspension system and some hardcore solid steel AFCO bushings. While that was cool and all, we still had work to do and pieces to add to the [...]