Result for: napco
Awesome Historic Video: A 1957 Chevy Truck Promotional Video Featuring NAPCO 4WD
It’s hard to imagine, but there was actually a time when people didn’t buy trucks for daily transportation and four-wheel-drives were a relative rarity. If you wanted a 4×4, you...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Finishing The Final Details On This Build And Trying To Get It Stuck In The Snow!
In this final installment of the NAPCO Clone build, Brent has some work to do in order to get this thing out the door and finished! If you have missed any of the previous installments on this build,...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Finishing The Patina To Make All Of This Truck Look Like It’s Been Together Forever
In this new installment of the NAPCO Clone build, Brent has some work to do in order to really make the patina pop, but not before fixing a couple other rust spots and buttoning up some other...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Painting The Bed To Match The Cab’s Patina, And Fixing The Winch!
In this latest installment of the NAPCO Clone build, Brent has painting to do on the bed to try and make it match up with the cab. This is going to take some technique and some trial and error to get...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Custom Dual Exhaust, And A Test Drive Even Though It’s Not Done Yet!
In this latest installment of the NAPCO Clone build, Brent has exhaust going in and some buttoning up of a couple things before a test drive. It’s not finished for sure, but it might be done...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Modifying Wheel Tubs, Installing Floor Braces, And Cutting Wood For The Bed.
In this latest installment of the NAPCO Clone build, Brent is working on the inside of the bed. Tub mods, floor bracing, and a homebuilt and stained floor too. If you have missed any of the previous...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Taking A Random Dump Bed Ram And Making It Work On The NAPCO!
In this latest installment of the NAPCO Clone build, Brent is working on the dump bed! If you have missed any of the previous installments on this build, use the link below! NAPCO was a company that...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Final Rust Repair, Insulating The Cab, And Installing The Underseat Heat
In this latest installment of the NAPCO Clone build, Brent is working on the final floor rust fix, the insulation inside the cab, and putting a custom heater under the seat. If you have missed any of...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Installing Seats And A Front Bumper!
In this latest installment of the NAPCO Clone build, Brent is working on the cooling system, then making sure everything is buttoned up under the hood. At that point, this thing is a runner and Brent...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Finishing Up Under The Hood, Adding A Cooling System, And Then Burnouts!
In this latest installment of the NAPCO Clone build, Brent is working on the cooling system, then making sure everything is buttoned up under the hood. At that point, this thing is a runner and Brent...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Finishing Front Fender Rust Repair On The 1955 Chevy Napco Clone
In this latest installment of the NAPCO Clone build, Brent is working on finishing up the front fenders. They needed some tricky areas repaired, so check out how he gets creative and breaks down...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Finally Fixing The Front Fenders!
In this latest installment of the NAPCO Clone build, Brent is working on finally fixing the front fenders. They need some tricky areas repaired, so check out how he gets creative and breaks down...
Halfass Kustoms 1955 Chevrolet NAPCO 4×4 Project: Modifying A Stock Column Shifter, Shortening The Driveshaft, And More!
In this latest installment of the NAPCO Clone build, Brent is working on a cool shifter setup where he’s using a factory manual column shifter and some ingenuity to make it shift the late model...
