Category Archive: 1320 Tech Story, Apex Tech Stories, Hack of the Week, TECH, Tech Stories, Tools, Videos, XL Tech Stories
How To Build A Roller Bender For Tubing, Flat Stock, Bar, And More, In Your Own Garage
If you do any kind of metal fabrication for cars then you have either wanted or purchased a tubing bender. The most common type is one that bends round tubing for roll bars, roll cages, and tubular...
Featured Product: Easily Add Lower Support to Your Gen III Hemi Engine and Transmission
Video Description: Most Late-model factory oil pans have some sort of provision to bolt the engine block and the transmission together for additional driveline strength and support. However, Not all...
HOW-TO Make CURVED FLANGES on SHEET METAL With A Flanging Tool You Can Make At Home!
We’re fans of home-built tools around here, and this one is probably the simplest one you’ll ever make! We’re talking about one piece of material and one tool that everyone has, and...
Get It Right: Here’s The Proper Way To Measure For Custom Shocks From The Crew At Ridetech
You want to install custom shocks on your car. Maybe you just want to make a simple change with a single adjustable tube shock or maybe you are going bigger with air suspension or perhaps multi-way...
700+ HP LS7 INTAKE SHOOTOUT-MSD ATOMIC VS HOLLEY HI RAM VS PERFORMANCE DESIGN CARBON pTR. WHO WINS?
I always love seeing people arguing online about which intake is best for their combo, because everyone has an opinion. And opinions are awesome, but dyno testing is even better and so this test from...
Who Makes The Best Drill Bit Sharpener? From $9 vs $350–Let’s Settle This By Testing Them All!
Somehow every garage or shop seems to have drill bits that are sharp and drill bits that are NOT sharp. I know this is how my drill bits seem to exist, and I’ve always wanted to get a drill bit...
Rebeldryver’s Ford 428 FE Project Part 6: Final Assembly Is On! Let’s Get This Thing Buttoned Up!
In Part 6 of the build, we’re going to final assembly coming to a close! Last time the cam and heads and such went together, and now it is looking like a real engine!. This engine is getting closer...
Vice Grip Garage Tried To Drive This Grand National Home Last Year, Now He’s Fixing The Brakes And Really Driving It After 20 Years!
This might be one of the more valuable machines in the Vice Grip Garage fleet, and when Derek got it last year his plan was to make it run and drive for the first time in 20 years so he could drive...
Million Dollar Barn Find Duesenberg! First Start Up after almost 60 years! Auburn Cord Duesenberg Co
Chad Ehrlich is back at it with another rarety to feature, and this one is a legit barn find, worth $1,000,000, and in this video, they are going to start it up for the first time in nearly 60 years!...
IronTrap Garage Is Opening Up The RAREST Flathead Supercharger Ever! Have You Ever Seen One Of These?
Matt often finds rare stuff, but these Marshman superchargers are something really special. I’ve never seen one until they showed one on the IronTrap Garage YouTube channel and now they have...
He Bought Every Cordless Drill Amazon Said To And Dyno’d Them ALL!
Video Description: Our lifetime of TOOL RANKINGS https://etsy.me/3G8j3QK At random this month we’re sending the top 2 from here to those of you who have this Today we test whatever...
1967 Chevelle SS 396 Rust Repair Tear Down And Quarter Panel Replacement. Still Lots To Do!
Rust repair is never really fun, but is often necessary on the old cars and trucks we know and love. There are many ways to take care of rust repairs, but regardless of whether you use NOS parts,...
Doug Cook’s Nova is BACK and Insanely Beautiful! Final Assembly Time For Motion Raceworks Most Famous Ride!
When Motion Raceworks’ Doug Cook crashed his famous Nova on Rocky Mountain Race Week last year, it was bad but he walked away and the car was rebuildable. It turns out it needed more work than...
Make It Kustom Designs A Custom Split 1932 Grill For A Hot Rod Roadster – Part 5 How-To Fit & Weld Sheet Metal Panels In Preparation For Final Metal Finishing Of The Split Grill
It is time to finish fitting and welding more stuff up on the split grill! In this video on the custom ’32 grill, Karl is going to show you how to setup, fit-up, and weld your sheet metal parts...