https://bangshift.com/forum/ QandA for everything mechanical en Sat, 18 Apr 2026 16:20:27 GMT vBulletin 60 https://bangshift.com/forum/images/misc/rss.png https://bangshift.com/forum/ https://bangshift.com/forum/forum/bangshift/tech-section/1374748-primer-sanding-tip Tue, 07 Apr 2026 16:23:53 GMT Using the Eastwood roll-on primer system, I was faced with sanding the epoxy primer. Even after waiting the specified 4 days for it to cure it still...

Clogged paper:





Cleaning process (I used the wire brush flat to the sandpaper but ran out of hands to take the pic):





Clean sandpaper:


]]> Tech Section DanStokes https://bangshift.com/forum/forum/bangshift/tech-section/1374748-primer-sanding-tip https://bangshift.com/forum/forum/bangshift/tech-section/1374702-anybody-ever-run-62s-on-a-461-stroker Sat, 04 Apr 2026 14:27:47 GMT Will 62s run 91 octane pump gas without detonation? Currently have 6x8s on my 461. Running pretty good still getting little stuff worked out.... Currently have 6x8s on my 461. Running pretty good still getting little stuff worked out. Thinking about switching to the 62s I have on the shelf but I’m missing a valve spring. Are springs interchangeable? These 62s have been ported and gone through. They are “ready to run” minus the missing valve spring

very excited to be able to hotrod again]]> Tech Section pontiacpower https://bangshift.com/forum/forum/bangshift/tech-section/1374702-anybody-ever-run-62s-on-a-461-stroker