NEW RideTech Magnetuner

[RideTech_Ryan]

Grand Champion runner up at 2016 Holley LS Fest out of 200 competitors!

• Direct interface with OEM MagneRide system on 2014-2017 C7 Corvette
  • Coming soon: MagneRide on 2016-2017 Shelby Mustang and Nissan GTR
  • 20 minute installation…direct plug in to OEM suspension ECU
• Enhances ALL suspension modes…Eco, Weather, Touring, Sport, and Track
• Increases both ride quality AND handling performance by optimizing shock tuning to keep the tires in better contact with the track / road
• Transforms unpredictable OEM shock corrections into driver instinctive actions…makes the car far more predictable and comfortable to drive aggressively

If you have a late model Corvette, Cadillac, or Shelby Mustang, you know you would really like to optimize the magnetorheological suspension control that the OEM’s have integrated into these vehicles. You want to improve ride quality as well as enhance the handling characteristics of your vehicle. That is what racers and hotrodders do!
Now you can!
Why?
The OEM suspension engineers do a good job of tuning these suspensions for a wide range of customers, climates, driving styles and road/track conditions. BUT…many of these imposed tuning strategies may or may not apply to you or your particular car. If you routinely take your Corvette, Cadillac, or Shelby to the track for example, you may not want to endure the compromises that are programmed into the suspension for more “civilian” driving styles…you may want to optimize the tuning for track use. The MagneTuner is how that is accomplished!
How?
The MagneTuner is an integrated suspension ECU that directly replaces your OEM suspension ECU. There is no modification necessary to your car. It comes pre-programmed with a calibration that not only GREATLY enhances the handling and stability of your car, but GREATLY improves ride quality as well! The same tuning strategies that allow the tire to remain in contact with the track act to enhance ride quality. It is truly a NO COMPROMISE solution!
Applications
C7 Corvette – Z51 and Z06 Shipping Jan 2017
2016-2018 Shelby Mustang Shipping Jan 2017
Nissan GTR Shipping Jan 2017
How much?
$1290 for the ECU
Recommended upgrades – [insert image here] C7 Corvette Z06 Delrin control arm bushing set – eliminates deflection of the OEM rubber bushings. These Delrin bushings create a much more stable cornering experience with little or no increase in NVH [noise, vibration, harshness]. $900
C7 Corvette Harness bar – [insert image here] The RideTech C7 harness bar is built from 1 3/4dia .120 wall 304L stainless and integrates directly into the structural strength points of the C7 door pillars. It retains full use of the OEM seat belt / shoulder harness and allows full range of OEM seat travel. The harness bar system also include seat brackets to install proper lap belts for a full 4 point / 5 point harness installation. $600

Want to talk to a MagneTuner tech?
Britt Marolf – [email protected]
Bret Voelkel – [email protected]

“On the road it’s like driving on velvet…on the track it’s like driving on Velcro!” – Bret Voelkel – C7 Z06 owner and MagneTuner enthusiast!