Announcement

Collapse
No announcement yet.

Dirt Bikes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    A photo of it's new stable mates, left to right, a 350, the 540 and a 550 in a 350 frame. There is also a CR500 in the stable!

    Click image for larger version  Name:	sYKSjHB.jpg Views:	0 Size:	129.3 KB ID:	1280628
    Last edited by 65RHDEER; September 19, 2020, 03:15 AM.
    Tim
    Melbourne Australia

    65 Hardtop Impala, 70 GTS Monaro, 93 "80" Landcruiser

    Comment


    • #47
      Judd and I had the opportunity to go ride on on about 4000 acres of a 24000 acre ranch leased by the Post Enduro Association. PEA puts on the Caprock Canyon Enduro every year and last year it was a National Enduro. We had a great time and rode the portion of the enduro loop that was on the 4000 acre "guest" side. It was a little dusty and was SUPER rough in places but we had a blast. Judd conquered everything we encountered and said it was the most fun he's had on a dirt bike. They have a few memberships open so we submitted an application to join.

      The 450 is definitely an arm stretcher in the tight twisties, but I never felt like I needed more power. The Rekluse is fantastc. Just twist the throttle and go. Anywhere. Forks need a little less compression damping as they seemed to be pounding me a bit on the real choppy stuff and it barfed a fork seal. I am thinking of raising the rear sprocket a coupe of teeth because I was making the 1st-2nd shift a lot and I would like to be able to just stay in 2nd.

      Click image for larger version

Name:	20210103_134314.jpg
Views:	142
Size:	933.5 KB
ID:	1285852Click image for larger version

Name:	20210103_142533.jpg
Views:	139
Size:	972.7 KB
ID:	1285851Click image for larger version

Name:	20210103_134251.jpg
Views:	140
Size:	1.78 MB
ID:	1285850Click image for larger version

Name:	20210103_134234.jpg
Views:	153
Size:	1.72 MB
ID:	1285849
      Life is short. Be a do'er and not a shoulda done'er.
      1969 Galaxie 500 https://bangshift.com/forum/forum/ba...ild-it-s-alive
      1998 Mustang GT https://bangshift.com/forum/forum/ba...60-and-a-turbo
      1983 Mustang GT 545/552/302/Turbo302/552 http://www.bangshift.com/forum/forum...485-bbr-s-83gt
      1973 F-250 BBF Turbo Truck http://www.bangshift.com/forum/forum...uck-conversion
      1986 Ford Ranger EFI 545/C6 https://bangshift.com/forum/forum/ba...tooth-and-nail

      Comment


      • #48
        I love my 450.... have you had your suspension tuned for you? My bike was nominally 'correct' for my size but getting it tuned made a huge difference....
        Doing it all wrong since 1966

        Comment


        • #49
          Originally posted by SuperBuickGuy View Post
          I love my 450.... have you had your suspension tuned for you? My bike was nominally 'correct' for my size but getting it tuned made a huge difference....
          No I have not. I only checked the sag on the rear and turned the compression clickers down on the forks but they still need a little less. The previous owner had the compression of the forks set so stiff they would make your arms buzz. It's no wonder he said it would wear you out. lol I backed them off about 4 clicks right after I got it, but it could use a little less still. I have zero complaint about the rear shock action. There were plenty of times I expected the back end to kick up and was pleasantly surprised when it didn't. It just sucked it up. It was the hardest riding I've done in several years and didn't even get leg cramps after riding.

          I am 6-3 so I am going to pop a set of 30mm bar risers in it to make standing a little more comfy and I may buzz 1" off each end of the bars. They feel wide, 32" tip to tip.

          Life is short. Be a do'er and not a shoulda done'er.
          1969 Galaxie 500 https://bangshift.com/forum/forum/ba...ild-it-s-alive
          1998 Mustang GT https://bangshift.com/forum/forum/ba...60-and-a-turbo
          1983 Mustang GT 545/552/302/Turbo302/552 http://www.bangshift.com/forum/forum...485-bbr-s-83gt
          1973 F-250 BBF Turbo Truck http://www.bangshift.com/forum/forum...uck-conversion
          1986 Ford Ranger EFI 545/C6 https://bangshift.com/forum/forum/ba...tooth-and-nail

          Comment


          • #50
            Sorry, but reading this thread got me reminiscing about my dirt bike days in the early 70's, so I have a story. I started on a Honda XR75 when I was 13. When I was 14, I got a 1-1/2 year old Monark 125 MX. We had 3 local unauthorized (trespassing) riding areas that were very popular for dirt bikes. I could get to any of them with only riding on the street for less than 1/2 mile. Street riding was illegal for a dirtbike with no street equipment, license, and a kid to young to get a drivers license. So that was the big challenge to get to the tracks. The rest of the route was railroad tracks, trails, freeway right of way, etc. One was an active gravel pit that we called "the pit". It was closest to home, but very risky for cops. Another was a level (except for the whoops) modified oval laid out on the freeway right of way that was known as the jap track. The other was vacant development land that had large steep hills, swamps, woods, creekbed, just about everything. It was called the European track. Then we had sporadic road trips to the far away official motocross tracks.
            I rode with a bunch of local guys who were 2 - 4 years older than me and they were serious, and very fast. We studied the techniques of the pros, practiced them, and did all of their recommended exercises to build our strength and stamina, and all of the recommended mods to the bikes. I was always struggling to keep up with my older, more experienced friends. I figured I just wasn't very good. Till I met a guy at school who had an RM125 who rode with a group at a gravel pit a few mile away. We arranged a little race, I did recognisance on my bicycle, found a way to maneuver up there without too much street riding. We practiced for 1/2 hour so I could get familiar with the course, and I lapped them a at least few times. I was dumbfounded, I was so used to bringing up the rear. They all found excuses to go home and the race never happened.
            I had several serious crashes, 2 with broken bones and one that landed me in the hospital with amnesia and a broken bone. It took a couple days for me to start getting some of my memory back, and years for it all to come back.
            When I turned 16 I got my drivers license and a car, and never rode dirt bike again. I still have the Monark 125 MX. I actually started restoring it in 2020, but stalled for lack of parts and time.

            Last edited by Hemi Joel; January 8, 2021, 03:16 PM.

            Comment


            • #51
              Great story Joel, the early 70's was my era of learning to ride too .. great times, but I don't remember the Monark brand.

              Comment


              • #52
                Monark of Sweden, as the name implies, was a Swedish company that built motorcycles among other things. They only imported 1100 bikes into the USA, so they weren't too well known in this country. There was a dealer for them in Minneapolis, so they were a little more common around here. They were very successful in the big European racing events of the 50s, 60s, and early 70s. The Monark MX was known for being light, powerful, and good handling. It had a chrome moly frame, Cerianni forks, Girling shocks, and a Sachs engine. The biggest issue with them was that they had a crappy six-speed transmission that was prone to missed shifts. You pretty much had to granny shift it, or take a chance of finding one of its many neutrals.
                Last edited by Hemi Joel; January 9, 2021, 08:22 PM.

                Comment


                • #53
                  If you are interested, here is a cool interview about the early days of Monark coming to the US: https://siegecraftnw.com/Int-Wallenberg.htm

                  Comment


                  • #54
                    Since we are flashing back, behold my Kawastratton. I about lost my mind when I saw the mag at the local book store. Couldn't believe it.

                    Click image for larger version

Name:	20210109_201711.jpg
Views:	120
Size:	1.67 MB
ID:	1285915Click image for larger version

Name:	20210109_201722.jpg
Views:	111
Size:	1.54 MB
ID:	1285916

                    Life is short. Be a do'er and not a shoulda done'er.
                    1969 Galaxie 500 https://bangshift.com/forum/forum/ba...ild-it-s-alive
                    1998 Mustang GT https://bangshift.com/forum/forum/ba...60-and-a-turbo
                    1983 Mustang GT 545/552/302/Turbo302/552 http://www.bangshift.com/forum/forum...485-bbr-s-83gt
                    1973 F-250 BBF Turbo Truck http://www.bangshift.com/forum/forum...uck-conversion
                    1986 Ford Ranger EFI 545/C6 https://bangshift.com/forum/forum/ba...tooth-and-nail

                    Comment


                    • #55
                      Now that's cool!

                      Comment


                      • #56
                        Judd and I did some work on Saturday. Judd replaced his head pipe o-rings and springs (and lost a bit of knuckle meat) and put some new brake pads on the rear.

                        Click image for larger version

Name:	20210109_144928.jpg
Views:	118
Size:	1.23 MB
ID:	1285954
                        I installed the 30mm bar risers, trimmed an inch off each side of the bars and replaced a leaking fork seal. It was my first time working on a KYB SSS fork. The twin tube internals are very interesting. I just need a bottle of fork oil and I can put it back together.

                        Click image for larger version

Name:	20210109_144939.jpg
Views:	101
Size:	1.32 MB
ID:	1285955
                        Click image for larger version

Name:	20210109_162349.jpg
Views:	103
Size:	1.57 MB
ID:	1285956
                        Life is short. Be a do'er and not a shoulda done'er.
                        1969 Galaxie 500 https://bangshift.com/forum/forum/ba...ild-it-s-alive
                        1998 Mustang GT https://bangshift.com/forum/forum/ba...60-and-a-turbo
                        1983 Mustang GT 545/552/302/Turbo302/552 http://www.bangshift.com/forum/forum...485-bbr-s-83gt
                        1973 F-250 BBF Turbo Truck http://www.bangshift.com/forum/forum...uck-conversion
                        1986 Ford Ranger EFI 545/C6 https://bangshift.com/forum/forum/ba...tooth-and-nail

                        Comment


                        • #57
                          I've been a big fan of the Dakar for years, really enjoy keeping track of the Aussies who are riding in it. Toby Price on a bike is just amazing.

                          This is the Bike Highlights video, looks to be an interesting place to be on a bike.

                          Tim
                          Melbourne Australia

                          65 Hardtop Impala, 70 GTS Monaro, 93 "80" Landcruiser

                          Comment


                          • #58
                            I have never seen a Dakar bike up close but with all the electronics and big tanks, I have always thought they would be top heavy and hard to ride - especially in sand. It is a very impressive race/rally!

                            Comment


                            • #59
                              Love this thread.
                              Hemi Joel, The Minneapolis Motorcycle scene was so cool back in the 90s when I was developing my Ducati Race bike. My motor was built there and Dyno tuned etc.
                              Now I just do dirt stuff, here is a couple pics from our last ride in October in Michigan's UP.
                              My bike is the Husky, and I'm the dork in on the right
                              It was a little cold and slippery, fun just the same.



                              Click image for larger version

Name:	winter-ride1.jpg
Views:	165
Size:	231.6 KB
ID:	1286586
                              Click image for larger version

Name:	winter-ride2.jpg
Views:	153
Size:	322.7 KB
ID:	1286587

                              Comment


                              • #60
                                we may have just enough snow this week to do this where I live
                                Doing it all wrong since 1966

                                Comment

                                Working...
                                X