I need a 22-26in long AN-20 hose with either a 45 or str at one end and a 90 at the other. Either that or someone who is still using reusable hose ends and enough parts to put together that kind of a configuration
oh yeah
need a long one
unless you set the radiator back
ever see the setup on the shelby series one aurora motor ?
Nope
Radiator is as far back as I dare, the fan is 3/4in away from the waterpump pulley spindle. Engine has a center mounted water neck and drivers side top fitting.
Went to Autozone and grabbed a 1 1/4in flex hose and yanked the coil out of the middle of it. Got some AN-6 line and taped the spring to it then twisted it down so I could feed it into the -20 hose fitting. After around 5 attempts to get it small enough while still staying taped I got it fed in and the tape let go exactly at the right time and I just yanked the -6 line out and the spring stayed in. Not a trace of a kink when I hooked it back up!
Comment