dick will either have it, repair it, or know where to get it - my buddy owns a shop next door to him and dick has a great rep on the west coast for his work and craftsmenship
they are all the same the face is different..
even a 82 t/a gauge should work just change the face 0-90ohm
That is incorrect.
The gauge has a spot to fit in, and some
of the buckets that contain the windings are
of a different diameter.
min, I just (an hour ago) looked at my 71 sweep and my 82 t/a fuel gauge,
they are the same othere than the face.. and needle
0-90ohm
Nice.
In the last 2 days, I've pulled the I/P's apart on 5 different 70's
era GM cars sitting in the back lot, all were different, all mounted the
gauge to the face differently. No screws, rivets.
Some were bigger, and the face mounting holes were farther
apart, the difference stacks up when room is limited.
if you call dick, tell him you have a friend that is friends with dave from ultimate imports and chris from scottsdale muffler, one of thier dirt track racing friends.
Comment