So how thick is your pushrod? (get ya mind outta th guttah!)

[Caveman Tony]

Let's hear it.

Rpm, lift, duration, Big/Small block, 0.055 wall?, 0.060-wall? Whatcha got?

how 'bout .080" wall?

Who's is bent?

Uh... once again, get ya mind outta that gutter.

[Barry Donovan]

no pushrods for me.
those are for girls.

get your head out of the gutter.

[milner351]

one piece trickflows for the SBF, it's a pretty mild cam.

Summit Racing Part Number: FMS-M-6250-X303

Cam Style: Hydraulic roller tappet
Basic Operating RPM Range: 2,200-6,200
Intake Duration at 050 inch Lift: 224
Exhaust Duration at 050 inch Lift: 224
Intake Valve Lift with Factory Rocker Arm Ratio: 0.542 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.542 in.
Lobe Separation (degrees): 112
Computer-Controlled Compatible: Yes

PUSHRODS - one piece trick flow:
For Use with Guideplates: Yes
Pushrod Tube Diameter: 5/16 in.
Pushrod Material: Chromoly
Oiling: Yes
Tapered: No
Tip Attachment: Formed
Top Tip Diameter: 5/16 in.
Bottom Tip Diameter: 5/16 in.
Wall Thickness (in): 0.080 in

[Caveman Tony]

I know 3/8" are supposed to be stronger than 5/16", but if the 3/8" rods are only .055 or .060" wall, wouldn't that actually be weaker?

[cstmwgn]

[email protected] [email protected] .653 lift@valve 6,800 chip - 3/8" .080 wall

[mopower58]

My wedge was a Comp roller [email protected] with 1.6 harland sharps lift is .704. 3/8 x .080. 4 1/2 years and counting.