Announcement

Collapse
No announcement yet.

RideTech 48 Hour Corvette Build

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    is there any videos of the build like hot rod did with the crusher engine swap?
    Originally posted by Remy-Z;n1167534
    Congratulations, man. You've just inherited the "Patron Saint of Automotive Lost Causes" from me. No question.

    75Grand AM 455:Pissed off GrandMA, 68 Volkswagen Type1 "beetle":it will run some year

    Comment


    • #32
      The end of the build was disappointing in more ways than one, I could go back and look at footage from the other days but not from the end of the build.
      And now there is no information anywhere apart from a little here telling us of the end result.
      Last edited by 65RHDEER; March 16, 2015, 01:30 AM.
      Tim
      Melbourne Australia

      65 Hardtop Impala, 70 GTS Monaro, 93 "80" Landcruiser

      Comment


      • #33
        Coincidentally was just trying to talk my wife into a Vette today. She said she'd rather drive my stake truck.

        Comment


        • #34
          Stay tuned everyone. The reason that the filming stopped was because the equipment had to go back as it cost over a $1000 a day to keep it. I am waiting on video's from this weekend of it on the chassis dyno and its track time down in Bowling Green, Ky. I will get it posted up as soon as I get it.
          CHECK US OUT AT:
          www.ridetech.com

          Comment


          • #35
            First time Racing this weekend at the Good Guys Fort Worth show. Finished 4th which is awesome for the first time out.
            http://www.ridetech.com/…/…/03/good-guys-ft-worth-autocross/
            CHECK US OUT AT:
            www.ridetech.com

            Comment


            • #36
              Check out what the 48 Hour Corvette did in Texas
              CHECK US OUT AT:
              www.ridetech.com

              Comment


              • #37
                The RideTech 48 Hour Corvette gets the golden ticket to Scottsdale shoot out!
                Leader Board Loaded With RideTech In Raleigh
                The RideTech team traveled to Raleigh, NC this past weekend to compete in the Goodguys' Autocross Series with more stellar results.

                Friday started off a bit rainy but when the action got started in the afternoon, Bret Voelkel in the RideTech 69 Mustang and Chris Smith in the 48 Hour Corvette immediately put down the fast laps. At the end of Friday the Corvette developed an engine miss that was ultimately diagnosed as a bad lifter. Smitty and the rest of the RideTech team spent most of Friday evening resolving that issue in order to make the call on Saturday morning. Saturday’s weather was hot and sunny making for a more challenging track surface but the RideTech cars remained near the top of the leader board.

                The weather was looking much worse on Sunday but the competition was completed by 11:00 AM with Kyle Tucker taking the top spot and Chris Smith and the RideTech 48 Hour Corvette placing 2nd and thereby winning the invitation to the year end Scottsdale “Duel in the Desert” autocross shootout. Bret Voelkel in the RideTech 69 Mustang finished 4th.

                Smitty had this to say about the weekend’s results: "All the work everyone has put into this Corvette is showing every weekend. The car continues to get faster and faster. We just locked in our spot for Scottsdale and we haven't even turned this animal up yet. This is the year of the Corvette!"

                The weekend was not all smiles and sunshine, but with the team's strong determination and help from a few others in the sport and industry, we persevered. When Bret Voelkel was asked about Raleigh and the weekend’s outcome he said: " The Corvette and the Mustang were welcomed with a huge amount of enthusiasm at Raleigh…I’m glad we could perform up to expectations. As with any high performance car, there were some significant challenges to overcome this weekend…our heroes among heroes at Raleigh were Lokar, MSD, Tim McGilton, and Chris Smith for keeping the Corvette up and running!"
                Chris Smith will be running the 48 Hour Corvette this coming weekend in Kissimmee at the Goodguys' 2nd Annual Florida Nationals. (EVENT INFO)

                Chris & Bret were not the only successful RideTech Nation members this weekend. RideTech Shocks and Falken tires were on 4 of the top 5 in the Pro Class including Rob MacGregor's "Hellboy" C10 and Keith Corrigan's "Velocity" Camaro.

                For more information on these cars and the components in them, go here: (48 Hour Corvette) (69 Mustang)
                CHECK US OUT AT:
                www.ridetech.com

                Comment


                • #38
                  CHECK US OUT AT:
                  www.ridetech.com

                  Comment


                  • #39
                    We will be releasing 4 hour blocks of the 48 Hour Corvete build every few days. Here is the first 4 hour segment enjoy!
                    CHECK US OUT AT:
                    www.ridetech.com

                    Comment


                    • #40
                      The 2nd installment of the Build Is here!
                      In March of 2015, RideTech and dozens of other manufacturers came together to build a C3 Corvette. The build was streamed live; this is the recording of tha...

                      Last edited by RideTech_Ryan; May 29, 2015, 10:27 AM.
                      CHECK US OUT AT:
                      www.ridetech.com

                      Comment


                      • #41
                        Now the 3rd installment. This should occupy some down time on the weekends!
                        In March of 2015, RideTech and dozens of other manufacturers came together to build a C3 Corvette. The build was streamed live; this is the recording of tha...


                        CHECK US OUT AT:
                        www.ridetech.com

                        Comment


                        • #42
                          Now the 4th installment of this awesome build!
                          In March of 2015, RideTech and dozens of other manufacturers came together to build a C3 Corvette. The build was streamed live; this is the recording of tha...
                          CHECK US OUT AT:
                          www.ridetech.com

                          Comment

                          Working...
                          X