damn thats bad. looks like they never changed the oil in it..... ever
Announcement
Collapse
No announcement yet.
1985 Fiero - Last Hope
Collapse
X
-
Originally posted by Shelty View Postdamn thats bad. looks like they never changed the oil in it..... ever
My mom had a 79- 5.0 Cougar she loved Drove it 45 miles one way, freeway driving 5 days a week, 35 country roads on weekends the life of the car, Dad demanded Pennzoil.. Looked just like that! Regular oil changes and all that..
Comment
-
awful stuff, but if you want a great fight with a troll; say Pennzoil is crap on Corvette Forum. There's a guy who claims he's an oil engineer for Pennzoil (he's not, but I admire his tenacity to stick to his lie) that thinks the world lives only because of Pennzcrap. Quacker state isn't much better.Doing it all wrong since 1966
Comment
-
Originally posted by SuperBuickGuy View Postawful stuff, but if you want a great fight with a troll; say Pennzoil is crap on Corvette Forum. There's a guy who claims he's an oil engineer for Pennzoil (he's not, but I admire his tenacity to stick to his lie) that thinks the world lives only because of Pennzcrap. Quacker state isn't much better.
Hellinor- 2005 Mustang GT-Bolt ons, in need of a turbo
War Wagon- 1966 Bel Air Wagon-355 Crate motor, 700r4, flies pretty good for a brick...
Comment
-
Originally posted by SuperBuickGuy View Postawful stuff, but if you want a great fight with a troll; say Pennzoil is crap on Corvette Forum. There's a guy who claims he's an oil engineer for Pennzoil (he's not, but I admire his tenacity to stick to his lie) that thinks the world lives only because of Pennzcrap. Quacker state isn't much better.
OPINION, worth exactly what it costs: I've got mixed emotions about any effort to dislodge the cakey brown crap slugde. I don't want it wandering through oil passages and grinding it's way past bearing surfaces. I think the way to clean it is a hot tank during a rebuild. The stuff that makes the soft deposits turn loose is not going to remove the hard black crap that gets burned / infused onto whatever parts. I tend to believe the engine has seen plenty of really short trips, and been pretty hot at more than one point in it's life for the oil and dirt to make itself part of the casting. I've seen a LOT worse. I'd change the oil and drive it until it bangs.
I can't help but look at a 2.5 and wonder about a 140 hp GM 3.0 from a boat as the replacement candidate. They lead a cleaner life and it's rare that a boat doesn't get run up to operating temperature so it can burn off junk in the crankcase.Flying south, with a flock of bird dogs.
- Likes 2
Comment
-
Well, the engine's resident gunk issue will have to work itself out in time. I've been distracted, which is what projects are for.
Craigslist turned up a sad little gem. Sad because someone was scrapping a 1985 Fiero GT with a blown engine. Gem because I bought a bunch of great stuff off of him for $200. What did I get for that you ask? Amongst a few other loose goods, I scored these:
Yeah, that's right, alloy rims and a new wing (need for wing replacement seen clearly). Pretty stoked about the rims. The tires are wider, and they look dashing. Not in pristeen condition, but that's rather the point of this build.
Aside from ripping out some of the more moldy items inside the cabin, I also scored a new clutch slave cylinder on Ebay (mine was rusted solid). I hope the master cylinder is in good shape so I can get the clutch working finally. It would kinda suck to get it started and not be able to take it for a spin around the block.
And for fun, here's the FieroRunner:
2 Dope Yo
Comment
-
Good score! All mine had those rims. I always liked them.Chris - HRPT Long Haul 03, 04, 05, 13, 14, 15,16 & 18
74 Nova Project
66 Mustang GT Project
92 Camaro RS Convertible Project
79 Chevy Truck Project
1956 Cadillac Project
Comment
-
Busy week with things not-wrench-related. But I still managed to get a few things done. Namely, I pulled that cracked-up rear wing, chopped it to bits, and threw it in the bin. I felt a little bad about doing such a thing, seeing as they will never make one of those body panels again in the history of mankind. But hey, we destroy irreplaceable things all the time on this planet, and sadly,
most of them are human beings.
On a lighter note, I noticed my fender was cracked, so I did some drift-stitching on it. Yeah!
Afterward I gooped some caulk over the crack to keep water out. I have some rust on the body on this side only, and I think trapped water was to blame. That and three decades.
One of the two linkages going back to my gear selector was completely shot (see rusty metal thing in the middle of the pic), so I fabbed up a replacement/MacGuyver with a carriage bolt, a piece of .303 shell casing, and some loose hardware. A 3/8" carriage bolt has a square shoulder on it almost identical to the stock one, which is important so the piece doesn't unscrew itself over 1000 shifts.
I drilled out the back of the 'cup' for the old ball (see top of photo) and simply passed the brass ".303" sleeve through it with some lithium grease for added measure. This particular shift linkage only sees movement in one axis, so the original ball design was a bit overkill. The tapered shape of the .303 shell keeps the cup from sliding back and forth too much as well. Splendid!
The above pic shows the new assembly installed, with bolt cut off to a more sensible length. I more-or-less copied this design from a 'repair kit' sold by the Fiero Parts Store. Theirs was a little more fancy, but mine was a little more free. Free wins.
The steering wheel redux is almost done, so stay tuned!
Thanks for watching.
Comment
-
pretty impressive.
even more so that you had a .303 lying around lol. I cant find that ammo for my 1942 Enfield to save my life. one of the best shooting guns I own, just so hard to find the ammo for it in the people's republic of marylandHellinor- 2005 Mustang GT-Bolt ons, in need of a turbo
War Wagon- 1966 Bel Air Wagon-355 Crate motor, 700r4, flies pretty good for a brick...
Comment
-
Originally posted by Shelty View Postpretty impressive.
even more so that you had a .303 lying around lol. I cant find that ammo for my 1942 Enfield to save my life. one of the best shooting guns I own, just so hard to find the ammo for it in the people's republic of maryland
Nice reuse of shell! I've used old brass to cut gasket holes... some days hoarding pays off.Flying south, with a flock of bird dogs.
- Likes 1
Comment
Comment