.

[SpiderGearsMan]

Re: 1990 Camaro RS

good job sniffin out the deals

[82z]

Re: 1990 Camaro RS

Where in michigan are you at? I'm getting ready to part out a 92 25th anniversary rs.

[82z]

Re: 1990 Camaro RS

If the car is a stick then you should be able to just leave it in neutral.

[malc]

Re: 1990 Camaro RS

If ya needs em, 1982-92 Camaro Firebird new 4 pc belt weatherstrip set.
http://cgi.ebay.com/ebaymotors/
1982-92-Camaro-Firebird-NEW-4-pc-belt-weatherstrip-set_W0QQcmdZViewItemQQ_trksidZp4634Q2ec0Q2em14Q2el 1262QQhashZitem4cea76208dQQitemZ330351124621QQptZ
MotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

I got me a set off this guy and they do fit.

[malc]

Re: 1990 Camaro RS

Here?s another, he has more, it?s his main page.
http://stores.shop.ebay.com/Kenosha-Classics_?_sid=210883826&_trksid=p4634.c0.m14&_pgn =1


Here.http://cgi.ebay.com/ebaymotors/1982-92-Camaro-Firebird-NEW-4-pc-belt-weatherstrip-set_W0QQcmdZViewItemQQ_trksidZp4634Q2ec0Q2em14Q2el 1262QQhashZitem3ca4a6b1c2QQitemZ260460425666QQptZM otorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

[HoosierGTA]

Re: 1990 Camaro RS

I think it should keep up.

[SuperBuickGuy]

Re: 1990 Camaro RS

hmmm tractor porn.... you're going to get bruab all into a tizzy with just a tire shot ;D

[STINEY]

Re: 1990 Camaro RS

I love barnyard-engineering, that is great!

More than one way to skin a cat.....

[malc]

Re: 1990 Camaro RS

Just added those Hedman headers and Y pipe to my wishlist at Summit. ;D

[ford141]

Re: 1990 Camaro RS

Is that an AC WD-45? This was my garage about a month ago when fabricating and installing my new tie-rod:



Ha, just had to post that. Thread hi-jack over.

[Mr4Speed]

Re: 1990 Camaro RS

Just added those Hedman headers and Y pipe to my wishlist at Summit. ;D

There's a guy over at thirdgen.org that makes a set that are generally regarded to be the best fit and quality for our cars. Since he isn't a site sponsor you have to PM him to get a price-I did and it was $450 for the headers without a.i.r. tubes and $200 for dual cat exhaust pipes. The headers all come coated. There's some pics in this thread-

http://www.thirdgen.org/techboard/exhaust/419415-1-3-4-header.html

[malc]

Re: 1990 Camaro RS

Just added those Hedman headers and Y pipe to my wishlist at Summit. ;D

There's a guy over at thirdgen.org that makes a set that are generally regarded to be the best fit and quality for our cars. Since he isn't a site sponsor you have to PM him to get a price-I did and it was $450 for the headers without a.i.r. tubes and $200 for dual cat exhaust pipes. The headers all come coated. There's some pics in this thread-

http://www.thirdgen.org/techboard/exhaust/419415-1-3-4-header.html

I have to go for price as well as nice, the Hedman setup I can have for $446.15 to my door.
But I want my fiberglass hood first. ;D

[malc]

Re: 1990 Camaro RS

The Harwood bolt on hood 3" cowl would cost me, from Summit to my local airport Barcelona, $693.20.
That?s 490.292 Euros, a little more for a rented van to collect and I?m home.
Got me a little piggy bank in my middle drawer. ;D

BTW, do the Hedmans eliminate the exhaust valve in the driver?s side header ?
The Edelbrocks I have now don?t.

[malc]

Re: 1990 Camaro RS

My Camaro had as original equipment a valve in the passenger side header,
this flap choked the motor for some reason on startup.
That had to be carried over onto my Edelbrock headers.
I cannot now remember all the details how it worked, I think it was linked by a rod to the EGR.
When I installed the Edelbrock headers I removed the flap from the setup.
I also removed the AIR tubes from the Edelbrock setup and plugged the oxygen sensor hole.

[NASBackyard]

Re: 1990 Camaro RS

I was having deja vu reading this thread. Looks like your having as much fun as I am on the Olds.