time for the build thread. I heard about the new rally being put on by the 24 Hours of LeMons folks. It's a 4 day event driving around california and nevada in August. No dollar limit on your ride, but it has to be accepted by the organizers. I told my brother about it, and he was kind of ho-hum...until I sent him the link to the Edsel for sale on craigslist. That got him interested! I went up to Vegas and bought it, it's a real turd, which is just right for this event.
Announcement
Collapse
No announcement yet.
That Fresh LeMon Scent--1959 Edsel
Collapse
X
-
That Fresh LeMon Scent--1959 Edsel
My fabulous web page
"If it don't go, chrome it!" --Stroker McGurkTags: None
- Likes 3
-
I got the title transferred today, and a license plate. So I figured I ought to get to work. I pulled the motor, and took it apart.
It's a 292, 2bbl carb, 3 speed trans. Although someone replace the trans with an overdrive unit. And then the rear bushing and yoke got overheated (towing?). And someone else picked up the car with a forklift, and bent the driveshaft. So there is some work to do...I talked to a friend today, he said he might be able to get me another trans like that reasonable.
The engine looks pretty nice inside. It would not run, acted like it wanted to, but not enough compression. The rings on several pistons were stuck, and there is some wear in the bores. but the (original) bearings, cam, etc look nice. The heads had been redone, I have not taken them apart to see what condition they're in. I'm planning to just hone it and put it back together, with a new timing chain (lots of stretch), new rings, and new gaskets and seals. It should be fine.
Last edited by squirrel; April 29, 2016, 07:21 PM.My fabulous web page
"If it don't go, chrome it!" --Stroker McGurk
Comment
-
In case you didn't know there are some idiosyncrasies with y-blocks, probably the most important is when you're putting the new chain in (unless you get lucky and have one of the OOOOLLLLDDDDD timing sets with the shiny links) to align the timing marks to the left (driver's side) and count 12 pins between them.
John Mummert's Y-block page is your friend. http://ford-y-block.com/technical.htm
Cool project, I look forward to seeing more.
Comment
-
I counted the links between the dots before I took the timing chain off...
and here's the intake ports...yeah, they're different!
My fabulous web page
"If it don't go, chrome it!" --Stroker McGurk
Comment
-
The dots are not lined up to each other, they are lined up perpendicular to the chain, on one side of it. the number of links between them ends up being 12. Pretty easy if you know that's how it works...or you look in a book...
I never though they were cool looking, although when I was a kid, the joke was pretty old. (Edsel was a joke)
My fabulous web page
"If it don't go, chrome it!" --Stroker McGurk
Comment
-
A joke ahead of it's time..
Depends whom you talk to I guess..
Lots lots lots of 292 engines powered mill equipment. Stack carriers had them, hot rodders thought they wer the best to hop up because they were beefier..
Some older derby guys swear the 292's run glowing red hot.. And keep chugging on..50/50 mixture of diesel and super..
Should be a reliable little motor for your puropse..
Comment
-
I think the motor will be fine.
My fabulous web page
"If it don't go, chrome it!" --Stroker McGurk
Comment
-
I guess I need to process some pictures. I've been working on the engine, got a lot of parts cleaned up and new stuff ordered. I decided the cam bearings need to be replaced, they are pretty badly worn, especially the middle one, which is what feeds oil to the rockers. Lousy rocker arm oiling is a common problem on these engines, for several reasons. I also spent a while cleaning out oil passages, they're not spotless now, but they are open at least. I also honed the block.
A friend gave me a 57 overdrive transmission, it looks nice on the outside, cleaned and painted, but I need to look inside and see what it's like. It has coarse splines instead of fine, so I need to get a different clutch disc, and a driveshaft yoke. But it should work.
My fabulous web page
"If it don't go, chrome it!" --Stroker McGurk
Comment
-
Sounds like good progress. Looking forward to the pictures and the next update!Chris - HRPT Long Haul 03, 04, 05, 13, 14, 15,16 & 18
74 Nova Project
66 Mustang GT Project
92 Camaro RS Convertible Project
79 Chevy Truck Project
1956 Cadillac Project
Comment
Comment