Announcement

Collapse
No announcement yet.

Plastic Fantastic tew

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • SuperBuickGuy
    replied
    Originally posted by cstmwgn View Post

    Do the switches need to carry that much current?
    Could relays provide the power/load and the switch just activate the relay?
    short answer, no they don't... long answer, I was under the impression that the motors only took 7 amps to operate.... I've tested them and 10 amps is what's required... but 30 amps is what they can draw.... each.

    Leave a comment:


  • cstmwgn
    replied
    Originally posted by SuperBuickGuy View Post

    these aren't cheap switches, they died with their boots on.
    Do the switches need to carry that much current?
    Could relays provide the power/load and the switch just activate the relay?

    Leave a comment:


  • SuperBuickGuy
    replied
    Originally posted by Deaf Bob View Post
    Cheap switches used as ignition on/off never lasted for us in derby... kid was working at the local International dealer and found some stout ones.
    these aren't cheap switches, they died with their boots on.

    Leave a comment:


  • Deaf Bob
    replied
    Cheap switches used as ignition on/off never lasted for us in derby... kid was working at the local International dealer and found some stout ones.

    Leave a comment:


  • silver_bullet
    replied

    Leave a comment:

Working...
X