Buinicorn the 1964 Skylark wagon sleeper

[SuperBuickGuy No Life Outside BangShift.com Find all posts View Profile Close SuperBuickGuy]

Sunday, mostly I went to Portand (3 hour drive a direction) to visit my parents and pickup a couple things
tires

and a Craigslist motor

bad story behind that motor - it isn't what was promised (bad rod, not bad headgasket, not L67).... ah well, it was the 2nd or third reason to go

anyway, on to more pleasant things.... welding and grinding
rust converter

final fit



tacked


with no way to get behind the piece, old screwdrivers make great pullers


welded but low



with a bit of convincing, straight





now body work

[SuperBuickGuy No Life Outside BangShift.com Find all posts View Profile Close SuperBuickGuy]

while the glue is drying on my hate to the next generation
I'm working on the hate from the last generation.... why, GM, did you seam seal these points? oh yeah, because you knew you'd be reading about it about now....

cut a new piece

then fit - but first now that has to dry (the dykem)

I thought I had a bunch of holes to fill... nope, just bad spot welding so when I do the body work, a touch of spot fill and it's fixed (yay me)

and back to the other corner with some CAD work

[SuperBuickGuy No Life Outside BangShift.com Find all posts View Profile Close SuperBuickGuy]

carrying on

match and weld

outside of a bit more grinding, and one more weld on the window edge, this side is done with metal work

of course, there's a bunch left on this side

[SuperBuickGuy No Life Outside BangShift.com Find all posts View Profile Close SuperBuickGuy]

I didn't do much (or I did a lot depending on how you look at it).

what I did was this



to do that required wiring this

and that was done after helping my electrician friend fall a tree at his cousin's house.... he would have wired without the help, but I would have missed them trying to squish the cousin's kid... or maybe I should say, the kid would have gotten squished

the full backstory. My shop has 1 phase power, my brake, my lathe, and now my shear are all 3 phase and run off a VFD converter... took some wiring to make that happen.

[SuperBuickGuy No Life Outside BangShift.com Find all posts View Profile Close SuperBuickGuy]

oh look, a piece I built but am not going to use....

grind

this corner is a pain, I think the right thing to do is get the brackets on my new bumper, line it up then do this corner... between the hit and rust it's anyone's guess where 'correct' is


more fitting before I realize what I should be doing

more rust repair, this time with lead removal

on the other side, I avoided having to mess with the lead.... not this side

that is a substantial amount of lead

now onto the channel

shrinkage

irony is I knew I was going to have to completely refab this fender... had I the shear I have now, I would have made it from scratch

and fitting the channel

Derek at Vice grip Garage (if you haven't watched it, you should) has a wagon in S. Dakota that I could have bought to get this quarter.... I couldn't bring myself to haul it back and cut it up -

[ejs262 Hero BangShifter Find all posts View Profile Close ejs262]

oh look, a piece I built but am not going to use....

welcome to my life! lol! works looking good bud!

[SuperBuickGuy No Life Outside BangShift.com Find all posts View Profile Close SuperBuickGuy]

test fit

primier

tomorrow I weld.... got a late start then had to comfort Buick because of thunder and vacuum.... it was terrible

[DanStokes Ancient LSR Guy Find all posts View Profile Close DanStokes]

I'm surprised that little Andy is unaffected by vacuums and thunder. Both the Standard Poodles, while not terrified, were certainly not fans. Tell Buick I wish him peace.

Dan

[SuperBuickGuy No Life Outside BangShift.com Find all posts View Profile Close SuperBuickGuy]

I'm surprised that little Andy is unaffected by vacuums and thunder. Both the Standard Poodles, while not terrified, were certainly not fans. Tell Buick I wish him peace.

Dan

it's funny how different dogs can be. Rue, my yellow lab, LOVED fireworks - to her she would come with a "where's the duck" look (she wasn't the sharpest tool, just the sweetest). My mom's german shepherds loved getting vacuumed (with the beater brush spinning)... they're all great (and weak) in their own ways... love em all.

[SuperBuickGuy No Life Outside BangShift.com Find all posts View Profile Close SuperBuickGuy]

more.... wait for it.... rust repair.... woohooo....

and it's some tasty stuff


cleaned

fit new

and more

closer

now it's just a matter of weld and cool so it doesn't warp

there... how to fix a window channel in 2 weeks and 200 easy steps

oops 201
needed to weld some spot welds in place

[silver_bullet No Life Outside BangShift.com Find all posts View Profile Close silver_bullet]

Much Gooder!

[SuperBuickGuy No Life Outside BangShift.com Find all posts View Profile Close SuperBuickGuy]

look ma, no fender

hmm, battery tray? but this is a grandpa car batteries go in front



now to put a bit of a bow in the fender

looking close

and even breathing holes


I could have welded it on tonight, but I think I'm going to tow it outside and check the lines... where it is right now that is hard to do

[silver_bullet No Life Outside BangShift.com Find all posts View Profile Close silver_bullet]

Battery box... Save room underhood for go fast goodies!

[SuperBuickGuy No Life Outside BangShift.com Find all posts View Profile Close SuperBuickGuy]

Battery box... Save room underhood for go fast goodies!

you mean "turbo inlet?"

nothing to see here... just grandpa in his wagon

you should probably get a tune on that Lambo

[SuperBuickGuy No Life Outside BangShift.com Find all posts View Profile Close SuperBuickGuy]

today was primer day for plastic fantastic tew, so this went outside
gives me an opportunity to stand back and look at that body line

I still think it's not straight to the ones on the door - maybe borrow a level laser...

now it's swapped spots with the Corvette so I can focus on finishing this (and the Corvette)