Originally posted by SuperBuickGuy
View Post
I got started on the new set of turbo manifolds, or at least the parts that I can without the flanges in hand.
the forward most ports will use 90* bends. and the downstream ports will use 45*, contoured to the pipe. the main log is tapered from the 1.5" 90*, to a 2" discharge at the end. I plan to use a V-band at each discharge, and I might weld in EGT bungs, but probably not. the taper is accomplished by cutting a long V-notch the length of a piece of pipe, and then clamping the pipe carefully to generate the taper.
Comment