Just got 2 new front discs/hubs for the whatever project. I'm using 40 Ford style spindles (forged repops, no old parts destroyed) with the Speedway kit with forged brackets for metric Gm calipers.The rotors are for a 73-77 Gm midsize car, but with a 5x5 bolt pattern, to match the rear axle (Winters HD qc with GN hubs).
So if anyone else needs the part numbers for the replacement inner cup and coneand seal used in these conversions, I have NAPA part numbers.
Inner cup: SKF L68110
Inner cone: SKF L68149
Seal: SKF CR seals 18546
I have put these together with no problems...
Of course the hubs have 5/8 coarse thread studs. I'll be changing these to 1/2-20 before it hits the road so I can use more than just stockcar wheels.
So if anyone else needs the part numbers for the replacement inner cup and coneand seal used in these conversions, I have NAPA part numbers.
Inner cup: SKF L68110
Inner cone: SKF L68149
Seal: SKF CR seals 18546
I have put these together with no problems...
Of course the hubs have 5/8 coarse thread studs. I'll be changing these to 1/2-20 before it hits the road so I can use more than just stockcar wheels.
Comment