Re: Holley Air Bleed Modification.
The only listed Holley main body is the 134-300 which is a 750 cfm.
I haven't enquired to see if the 1000cfm HP annular bodies are available as a spare part because I don't think the costs will be at all worth it compared to the $30 I've already spent on the 4.1mm drill and 10/32 intermediate and bottoming thread taps.
$30 and it will be air-bleed ready. ;)
Simply buying the required air bleeds is a lot cheaper than buying the gear to drill my own. Who knows, I might lash out and get the full Holley kit.
The only listed Holley main body is the 134-300 which is a 750 cfm.
I haven't enquired to see if the 1000cfm HP annular bodies are available as a spare part because I don't think the costs will be at all worth it compared to the $30 I've already spent on the 4.1mm drill and 10/32 intermediate and bottoming thread taps.
$30 and it will be air-bleed ready. ;)
Simply buying the required air bleeds is a lot cheaper than buying the gear to drill my own. Who knows, I might lash out and get the full Holley kit.
Comment