Announcement

Collapse
No announcement yet.

cam selection advise

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • cam selection advise

    i have a little project. i just bought a set of patriot heads https://www.patriot-performance.com/...&cat=40&page=1 and i'm probably gonna go with a victor jr. cheater kit, and around 11:1. on a 383.
    the car is a 3rd gen camaro with a 4.10 gear, it will weigh around 3500lbs. i need to get a set of rockers, a cam, and a torque converter.
    just want a little advice, or suggestions, i'm open to them all. i'm gonna drive it a few miles on the street, but i'm really intrested in posting up some numbers on the board.
    thanks
    Originally posted by TC
    also boost will make the cam act smaller

  • #2
    Re: cam selection advise

    Looking at the heads specs, I would go with a solid roller with somewhere around 550 lift, max is 575 with those springs, and 242-248 duration. Should make for a fun ride.
    BS'er formally known as Rebeldryver

    Resident Instigator

    sigpic

    Comment


    • #3
      Re: cam selection advise

      If you run a roller, you better change those springs, they dont have enough seat pressure to set the lash with : LOL
      2007 SBN/A Drag Week Winner & First only SBN/A Car in the 9's Till 2012
      First to run in the .90s .80s and .70's in SBN/A
      2012 SSBN/A Drag Week Winner First in the 9.60's/ 9.67 @ 139 1.42 60'
      2013 SSBN/A Drag Week, Lets quit sand bagging, and let it rip!

      Comment

      Working...
      X