Who narrows rear axles in the kansas city area ?
Announcement
Collapse
No announcement yet.
Who narrows rear axles in
Collapse
X
-
Re: Who narrows rear axles in
Beer, depending on your situation,shortening the rear tubes is not a very hard thing to do. If you have a 4 inch grinder and are capable of welding,its a snap.Axels on the other hand are best left to machine shops.or you can call a company like Curry and over the phone they will walk you thru the process of measuring from the centers out to flanges and make your axles for you.They will put what ever spline combo you need.There may be some portable welders in your area that would be capable of cutting the tubes out and shortening them.Hope this helps.am sure others will be replying soon.Good luck.Keep smiling,makes them wonder whats on your mind.
-
narrows rear axles
Welding on or around an axle tube can provide
a fast initial lesson in "How Metals Warp 101".
Best to be set-up in a proper jig-brace to maintain the same
precise before/after alignment ("true-ness") of the axle tubes.
Good shops know this & have the equipment & experience to do it correctly.
Far too many shops do not. -- HTH --
Comment
-
Re: Who narrows rear axles in
Lane Machine downtown Kansas City Might be called Lane brothers
The Circle track guys that make and sell Lane transmissions for dirt cars, its a two speed that the flywheel only turns when it starts and counter shaft doesnt turn in high gear
He has a IRS no tubes guys :2007 SBN/A Drag Week Winner & First only SBN/A Car in the 9's Till 2012
First to run in the .90s .80s and .70's in SBN/A
2012 SSBN/A Drag Week Winner First in the 9.60's/ 9.67 @ 139 1.42 60'
2013 SSBN/A Drag Week, Lets quit sand bagging, and let it rip!
Comment
-
Re: Who narrows rear axles in
if you need to shorten the halfsfafts , a driveshaft shop should be able to help you.Reading , Pa
Good Guys rodders rep.
"putting the seat down is women's work" Archie Bunker.
Ban low performance drivers not high performance cars .
Comment
-
Re: Who narrows rear axles in
Originally posted by ksj1Isnt it Layne Automotive.Bobby and Richard Layne.
Thats them! We have one of there Trans in a freinds Dirt Mod. They can respline2007 SBN/A Drag Week Winner & First only SBN/A Car in the 9's Till 2012
First to run in the .90s .80s and .70's in SBN/A
2012 SSBN/A Drag Week Winner First in the 9.60's/ 9.67 @ 139 1.42 60'
2013 SSBN/A Drag Week, Lets quit sand bagging, and let it rip!
Comment
-
Re: Who narrows rear axles in
Originally posted by mybeer54Thanks guys, I will look them up. ;D
Will also check cvaxles as well. 8)
Ron
It's really no different than trying to glue them back on after she has her way.
Comment
Comment