Announcement

Collapse
No announcement yet.

anyone here used the dart iron eagle 215cc platinum series heads?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16

    Re: anyone here used the dart iron eagle 215cc platinum series heads?

    Re: anyone here used the dart iron eagle 215cc platinum series heads?

    Eric, have you used beehives yourself? I've found them to "go away" quickly, and the lack of a inner spring scares me.
    Yes, on a friend's car. 377" (std bore 383), AFR 195 heads, Comp HR blower cam. F1R Procharger at 13psi. No more valve float at 5800 RPM with the beehives.

    Not sure how long they will last, I'll watch them closely though. Thanks for the heads up.

    Comment


    • #17

      Re: anyone here used the dart iron eagle 215cc platinum series heads?

      Re: anyone here used the dart iron eagle 215cc platinum series heads?

      I wouldn't be afraid to run a solid roller on the street at all, I ran a Herbert 638/657 lift roller in my 427 for a bunch of street miles (not a daily driver, a weekend toy), checked them every month or two, seldom had to adjust anything and if I did, it was only slight. I did run stainless roller rockers, triple springs, Bo Laws .100 long pushrods and girdles too though. Twisted it over 8000 a bunch of times with no float and no breakeage.

      Comment


      • #18

        Re: anyone here used the dart iron eagle 215cc platinum series heads?

        Re: anyone here used the dart iron eagle 215cc platinum series heads?

        i dont have platinum darts. But i have the dart head 215 2.05 1.60 in a 383 with a nos hyd cam not a roller an its right a 500.

        Comment

        Working...
        X