What's usually the best location to put an O2-sensor in a non-efi car?
Is there an optimum distance from the motor where it 'should' be put? Should it be near the hottest part in the exhaust-pipe?
I've read some info on this page: http://wbo2.com/lsu/position.htm
We recommend placing the sensor around 1 m (40") from the closest exhaust valve.
Sounds a bit vage, but maybe this is sensor-specific?
I want to install an O2-sensor in my Propane powered Dart, just to see where I'm currently at with AFR's and such. Also, in preparation of the possible 5.7 Hemi installation later on.
If it's of any relevance, the Dart has a dual exhaustsystem with no crossover-tube.
Is there an optimum distance from the motor where it 'should' be put? Should it be near the hottest part in the exhaust-pipe?
I've read some info on this page: http://wbo2.com/lsu/position.htm
We recommend placing the sensor around 1 m (40") from the closest exhaust valve.
Sounds a bit vage, but maybe this is sensor-specific?
I want to install an O2-sensor in my Propane powered Dart, just to see where I'm currently at with AFR's and such. Also, in preparation of the possible 5.7 Hemi installation later on.
If it's of any relevance, the Dart has a dual exhaustsystem with no crossover-tube.
Comment