Zonguldak escort Sivas escort Duzce escort Tokat escort Osmaniye escort Didim escort Kutahya escort Mardin escort Van escort Yalova escort Sanliurfa escort Ordu escort Alanya escort Fethiye escort Manavgat escort Does Locking Out an MSD Dizzy Affect Phasing? - The BangShift.com Forums

Announcement

Collapse
No announcement yet.

Does Locking Out an MSD Dizzy Affect Phasing?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Does Locking Out an MSD Dizzy Affect Phasing?

    I locked out my MSD 85561 Dizzy and I'm wondering if it affects rotor phasing without a timing controler, I'm just running a 6A box ? Seems when I rev it at idle lightly it responds fine but if I rev it quickly a bit higher up I can hear some light pop back, the sound that they usually make when the timing is off. When driving it there is no issue or pop back. I know the timing is correct so I'm wondering if the rotor is outta phase from the lock out??
    Last edited by REARSPROCKET; July 31, 2012, 02:08 PM.

  • #2
    what is the timing set at? and what is the engine?
    My fabulous web page

    "If it don't go, chrome it!" --Stroker McGurk

    Comment


    • #3
      Yes it can, to correct drill a hole in #1 on the cap in line with the tower then shine the timing light down the hole and see if it lines up. To fix if its off use the rotor you can adjust. Replace the cap or run the one with a hole just avoid water LOL I am not saying thats your issue just thats how you can correct it if its off
      2007 SBN/A Drag Week Winner & First only SBN/A Car in the 9's Till 2012
      First to run in the .90s .80s and .70's in SBN/A
      2012 SSBN/A Drag Week Winner First in the 9.60's/ 9.67 @ 139 1.42 60'
      2013 SSBN/A Drag Week, Lets quit sand bagging, and let it rip!

      Comment


      • #4
        Window'd the cap and the phasing is rite on slightly leaded, so all is good and it seems time for a new set of NGKs to go with the new cap and rotor. Thanks
        Last edited by REARSPROCKET; August 1, 2012, 03:58 AM.

        Comment


        • #5
          Glad it worked, I think its cool just watching it go on
          2007 SBN/A Drag Week Winner & First only SBN/A Car in the 9's Till 2012
          First to run in the .90s .80s and .70's in SBN/A
          2012 SSBN/A Drag Week Winner First in the 9.60's/ 9.67 @ 139 1.42 60'
          2013 SSBN/A Drag Week, Lets quit sand bagging, and let it rip!

          Comment


          • #6
            Thanks, Yah it's cool but window'd #1 and had to get in a real awkward position with the timing lite and my noggin to view.
            Last edited by REARSPROCKET; August 8, 2012, 09:32 AM.

            Comment

            Working...
            X