Looking for a cps syncronizer

[Runner1972]

Friend is putting in a new motor for this ranger{either 3.0 or 4.0, 96 Block} and the cps syncronizer is completely hosed and we can't seem to find one for a 95 model. He was to use to cause it rides deeper in the block.

Any idea guys on were to look?

[anotheridiot]

http://www.rockauto.com/catalog/moreinfo.php?pk=385818

MOTORCRAFT Part # DA2099 {#F67Z12A362AAB} ENGINE CAMSHAFT SYNCHRONIZER
w/ 123mm Shaft

looks like some have a 132mm shaft

[Runner1972]

Yep, that will work. Not sure about the shaft size however. He's gone as crazy as trying to strip a 96 one and use it in the 95 housing.

[anotheridiot]

they are pretty good there, good with returns too. it was the lesser named brands that had the one about 3/8ths longer. I ordered some transmission parts from there and they actually will have the manufacturer call or ask for vin numbers to try to find the right part. I wouldnt know which part is longer though, looks like the shaft goes all the way top to bottom so 123 was like 5.875 and 132 was closer to 6.25 on my digital caliper.