Announcement

Collapse
No announcement yet.

Testing LS6 coils?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Testing LS6 coils?

    How do I test these things to tell if they are good? Still trying to fix my problem of the engine going flat at 4,000 rpm at 10psi. Has new plugs and new plug wires. Air/fuel ratios look good per LM-1.

  • #2
    Re: Testing LS6 coils?

    Power up the coils as normal, then use a +5v voltage source to trigger spark. However, if they're running at idle they're probably just fine.

    The low battery voltage is a little disconcerting, should be above 13v. It's quite possible that your voltage correction is too low or incorrect for situations when the voltage drops. Can you configure that in your EMS?
    www.realtuners.com - catch the RealTuners Radio Podcast on Youtube, Facebook, iTunes, and anywhere else podcasts are distributed!

    Comment


    • #3
      Re: Testing LS6 coils?

      Yep, I can configure for voltage correction. I haven't done that yet.

      When are you coming out?

      Comment

      Working...
      X