Jay, I really hate to be the downer but those coil Brackets will crack I think, freQuency vibrations are a killer this is why we put mine on top of the Valve cover with a rubber on both sides. Hope it works man!!! I like the sight glass
Announcement
Collapse
No announcement yet.
Where to place injector bungs on Tunnel Ram manifold
Collapse
X
-
2007 SBN/A Drag Week Winner & First only SBN/A Car in the 9's Till 2012
First to run in the .90s .80s and .70's in SBN/A
2012 SSBN/A Drag Week Winner First in the 9.60's/ 9.67 @ 139 1.42 60'
2013 SSBN/A Drag Week, Lets quit sand bagging, and let it rip!
-
Very sweet motor! The intake looks great! Are those two 70mm TBs on the front?
Can hardly wait for the dyno charts!
Re: injector angle: Im thinking the same things. If you cant get the bung in just the right spot to get it to the valve you can tweak it with ijector type if necc., Various injectors have various spray patterns/angles. Walker Products has a good catalogue on their site with flow rates and pattern data thats normally tough to find for OEM stuff. http://www.walkerproducts.com/_pdf/c...components.pdf
Brucewww.FBthrottlebodies.com
Bruce K Bridges
Comment
-
Originally posted by JeffMcKC View PostJay, I really hate to be the downer but those coil Brackets will crack I think, freQuency vibrations are a killer this is why we put mine on top of the Valve cover with a rubber on both sides. Hope it works man!!! I like the sight glass
That sight tube for the oil level is the greatest thing since sliced bread, IMO. Nothing like being able to see what the oil level is doing with the engine running...
Comment
-
Originally posted by BKBridges View PostVery sweet motor! The intake looks great! Are those two 70mm TBs on the front?
Can hardly wait for the dyno charts!
Comment
-
Originally posted by Barry_R View PostShould I load my "small block" up and head to MN for a showdown?
(Thinkin' I'd be heading home with tail tucked...)
Comment
-
Originally posted by Barry_R View PostIt's on ebay right now. That 11% spot on my 870HP pull would put me at 965 comparable. Less cubes, old school carbs, and a couple points less compression - damn tempting odds in my world! Lets see if it makes reserve....www.realtuners.com - catch the RealTuners Radio Podcast on Youtube, Facebook, iTunes, and anywhere else podcasts are distributed!
Comment
-
Darn missed opportunities!
It did not make reserve - bidding stalled at $40G - sounds like a fortune but that's only the current ask/sell price for a cast crank unported head Cammer from one of the no-cred ebay regulars who lack the cajones to try EMC or drag week. This one is a much tougher customer...billet crank/rods, way cut up heads, proven poop and more tricks than a magician's convention...
I'll re-list it..
Comment
-
Those SOHC's are just freaking awesome. Its ever so slightly depressing knowing I'll be having my ass handed to me by these antiques. At least they are antique Fords.
I'll post my manifold pictures when its done.Drag Week 2006 & 2012 - Winner Street Race Big Block Naturally Aspirated - R/U 2007 Broke DW '05 and Drag Weekend '15 Coincidence?
Comment
Comment