As cast:




[/QUOTE]
Announcement
Collapse
No announcement yet.
Someones New EFI Intake Project is well underway
Collapse
X
-
Someones New EFI Intake Project is well underway
2007 SBN/A Drag Week Winner & First only SBN/A Car in the 9's Till 2012
First to run in the .90s .80s and .70's in SBN/A
2012 SSBN/A Drag Week Winner First in the 9.60's/ 9.67 @ 139 1.42 60'
2013 SSBN/A Drag Week, Lets quit sand bagging, and let it rip!Tags: None
-
Its getting there, Scott Foxwell is doing the porting. I have to talk this week to Gabby that worked for Wilsons before opening his new shop for deciding injector locations for sure I am thinking 1 1/2 inch up to as low as 1. To keep fuel reversion down. We will weld the bungs in and send it back for finish porting2007 SBN/A Drag Week Winner & First only SBN/A Car in the 9's Till 2012
First to run in the .90s .80s and .70's in SBN/A
2012 SSBN/A Drag Week Winner First in the 9.60's/ 9.67 @ 139 1.42 60'
2013 SSBN/A Drag Week, Lets quit sand bagging, and let it rip!
Comment
-
Its not for me............. MOOOOOOWAAAAAAAHHHHHAAAAAAA
TC the first hint is its a BBC Victor Ram. The Port opening has went from 4.9 sq. in. to 5.4 sq. in. to get as much port taper as we can....Last edited by JeffMcKC; March 6, 2012, 12:56 PM.2007 SBN/A Drag Week Winner & First only SBN/A Car in the 9's Till 2012
First to run in the .90s .80s and .70's in SBN/A
2012 SSBN/A Drag Week Winner First in the 9.60's/ 9.67 @ 139 1.42 60'
2013 SSBN/A Drag Week, Lets quit sand bagging, and let it rip!
Comment
-
Originally posted by JeffMcKC View PostIts not for me............. MOOOOOOWAAAAAAAHHHHHAAAAAAA
TC the first hint is its a BBC Victor Ram. The Port opening has went from 4.9 sq. in. to 5.4 sq. in. to get as much port taper as we can....Last edited by TC; March 6, 2012, 01:00 PM.
Comment
-
The manifold gods are smiling today. My nowhere near as sexy as that Parker Funnel Web showed up finally!! Woooo! It's got more port for a 302 than the torker does for a 460.
Nice looking hunk of aluminum there. I wish I *needed* it!!Flying south, with a flock of bird dogs.
Comment
-
It will be very interesting Bill if it will work better than a Very Worked over Stage 5 Super Victor. Looking to raise the TQ curve and Still get it to RPM we will see if it can Pass enough air.2007 SBN/A Drag Week Winner & First only SBN/A Car in the 9's Till 2012
First to run in the .90s .80s and .70's in SBN/A
2012 SSBN/A Drag Week Winner First in the 9.60's/ 9.67 @ 139 1.42 60'
2013 SSBN/A Drag Week, Lets quit sand bagging, and let it rip!
Comment
-
I was pleasantly surprised on mine that we made as large a step change as we did across the entire RPM band going from fully ported manifold, done with the heads as a unit, single four TB to the tunnel ram that was done to a standard spec via CNC programs with the new heads and a moderate cam given the dispacement: 282/294/113 .820ish. That said my previous head/manifold combination was not in the Very Worked class.
I'm glad we eneded up with the injectors lower on the runner as drivability is way better than I expected and the reversion was still pronouced shall we say at low rpm and idle.
It's hard to separate the efffect of improved heads, bigger cam and improved induction, but the car picked up almost .5 sec. and 7 MPH with a fat tune, similar weight, and a 12% slip converter, no suspension changes. Just the thing to get someone solidly into the next single digit.Drag Week 2006 & 2012 - Winner Street Race Big Block Naturally Aspirated - R/U 2007 Broke DW '05 and Drag Weekend '15 Coincidence?
Comment
-
Originally posted by CDMBill View Postand a 12% slip converter,Life is short. Be a do'er and not a shoulda done'er.
1998 Mustang GT https://bangshift.com/forum/forum/ba...ix-to-4sixzero
1983 Mustang GT 545/552/302/Turbo302 http://www.bangshift.com/forum/forum...485-bbr-s-83gt
1973 F-250 BBF Turbo Truck http://www.bangshift.com/forum/forum...uck-conversion
1986 Ford Ranger EFI 545/C6 https://bangshift.com/forum/forum/ba...tooth-and-nail
Comment
-
Converter slip can be over rated Bill dont fall into the trap of chasing it.2007 SBN/A Drag Week Winner & First only SBN/A Car in the 9's Till 2012
First to run in the .90s .80s and .70's in SBN/A
2012 SSBN/A Drag Week Winner First in the 9.60's/ 9.67 @ 139 1.42 60'
2013 SSBN/A Drag Week, Lets quit sand bagging, and let it rip!
Comment
-
On the chassis dyno the torque curve never nosed over so we figured the converter change was a bit too aggressive as did the guy who built it at Edge, so they restalled it for free per their guarantee after we got back. Saw essentially the same thing on the datalogs as the you could barely spot the shifts and the shift recovery point was only 600 RPM lower than the max RPM.
Who knows maybe that was what it needed.
That manifold porting looks great. Are the runners curved as well as tapered?Drag Week 2006 & 2012 - Winner Street Race Big Block Naturally Aspirated - R/U 2007 Broke DW '05 and Drag Weekend '15 Coincidence?
Comment
-
Originally posted by CDMBill View PostOn the chassis dyno the torque curve never nosed over so we figured the converter change was a bit too aggressive as did the guy who built it at Edge, so they restalled it for free per their guarantee after we got back. Saw essentially the same thing on the datalogs as the you could barely spot the shifts and the shift recovery point was only 600 RPM lower than the max RPM.
Who knows maybe that was what it needed.
That manifold porting looks great. Are the runners curved as well as tapered?
When a converter is not locked 1 to 1 it has TQ mulitiplication going on their is a balance I would like to stay above Peak TQ for sure.2007 SBN/A Drag Week Winner & First only SBN/A Car in the 9's Till 2012
First to run in the .90s .80s and .70's in SBN/A
2012 SSBN/A Drag Week Winner First in the 9.60's/ 9.67 @ 139 1.42 60'
2013 SSBN/A Drag Week, Lets quit sand bagging, and let it rip!
Comment
Comment