Bill I am still tuning around mine, my AFR has never worked, I just listen and pull plugs but I have found it helps to work on the timing as a patch.
Announcement
Collapse
No announcement yet.
EFI Intake plenum volume
Collapse
X
-
2007 SBN/A Drag Week Winner & First only SBN/A Car in the 9's Till 2012
First to run in the .90s .80s and .70's in SBN/A
2012 SSBN/A Drag Week Winner First in the 9.60's/ 9.67 @ 139 1.42 60'
2013 SSBN/A Drag Week, Lets quit sand bagging, and let it rip!
-
Originally posted by CDMBill View PostNo doubt the high stall converter masks a lot of what would otherwise be annoying stuff at low rpm load with the stick.Escaped on a technicality.
Comment
-
Without the lid it's just an IR intake without butterflies - no big deal really.
With EFI you probably do not even need a throttle body on a WOT deal. You can simply use TPS position to regulate "idle" settings in conjunction with with the rev limiters. It's just sit there and fart away at 1200RPM until it ran out of gas. Maybe give it a 1/2 throttle 4000RPM hold point to get it loaded before a pull. I threatened to do that one year at EMC and I think somebody overheard me and mandated 1, 2, or 4 barrels...
Comment
-
You converter guys.....
If I can't pick a converter out of a catalog then I'm in way over my head.
With a clutch I'd just crank the stall springs a flatt and let you have at it again. Give me 5 minutes.Originally posted by TCalso boost will make the cam act smaller
Comment
-
Yeah but you lack Tq mutiplication,,,,,,, not that you need it like my weenie motor2007 SBN/A Drag Week Winner & First only SBN/A Car in the 9's Till 2012
First to run in the .90s .80s and .70's in SBN/A
2012 SSBN/A Drag Week Winner First in the 9.60's/ 9.67 @ 139 1.42 60'
2013 SSBN/A Drag Week, Lets quit sand bagging, and let it rip!
Comment
Comment