Announcement

Collapse
No announcement yet.

Injector bung question take III action

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Injector bung question take III action

    My other engine that will be for the other project that's been waiting, has a intake with bung (cast in) for use with a fogger n.o.s. system. can these be drilled and used as injector bungs without having to use premade bungs?
    not sure if the as cast is big enough, but it sure make life easy.


  • #2
    Maybe. Most common injectors need 14 mm holes; how big are those bosses?
    Last edited by Matt Cramer; July 15, 2013, 06:07 AM.

    Comment


    • #3
      Most the nitrous boss's I've seen cast in don't have enough material to take and seal an injector bung.
      Escaped on a technicality.

      Comment


      • #4
        If it has Injector bungs yes but those in the picture look like Nitrous fogger bosses.

        http://www.twperformanceparts.com/im...2)-500x500.jpg

        Upper is injector bosses to be drilled lowers are for a fogger
        2007 SBN/A Drag Week Winner & First only SBN/A Car in the 9's Till 2012
        First to run in the .90s .80s and .70's in SBN/A
        2012 SSBN/A Drag Week Winner First in the 9.60's/ 9.67 @ 139 1.42 60'
        2013 SSBN/A Drag Week, Lets quit sand bagging, and let it rip!

        Comment


        • #5
          Not enough material there to do that. You'll need to weld in bungs.
          Nick Smithberg
          www.smithbergracing.com

          Comment

          Working...
          X