Trying to complete my wiring. 1 last small glitch. The o2 sensor has four wires (black ground, red switched power for heater, orange sensor(+), brown sensor(-). The relay board only requires 1 hook up for the o2 sensor which is the orange sense wire. No problem with the ground or switched power lead. Questions is, what do I do with the brown wire? Do I just run it to chassis ground aling with the black wire?
Announcement
Collapse
No announcement yet.
o2 sensor wiring with megasquirt relay board
Collapse
X
-
The sensor or the controller? The megasquirt cannot read a wideband sensor directly and has to work through a controller, like the LC-1 or such. The controller should have a wiring schematic, or be able to google one up depending on make. From there wire the wide-band signal to the relay board input.Escaped on a technicality.
-
Ok fellow efi guru's ...a follow on update to my questions with lack of detail on my part....sorry about that. OK, its a FAST O2 controller (part number 1706472) high res. kit. The controller has four wires but the megasquirt only has 1 input on the relay board for the signal +. Should I just combine the black ground and brown (O2 signal -) together? The relay board doesnt seem to have a O2 sensor return slot for the brown wire. How about it Mr. Cramer?
ed
Comment
Comment