That is a normal look in Chicago. It's called road salt.
lol...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
211 results.
Keywords
Members
Tags
-
You can try a quick and dirty thrust bearing check by prying the balancer back and forth gently.
If it is 1/8 inch or more they will leak, i don't...
Leave a comment:
-
-
This is where it gets confusing. If you turn the crankshaft 1 turn the pin will be on the other side.
Now the number 1 piston is up TDC the cam...Last edited by wrenchn2; February 9, 2018, 05:02 PM.
Leave a comment:
-
You can try pulling one battery cable and putting a test light between the cable and the battery. If the light lights with the doors closed and the hood...
Leave a comment:
-
I know you have done this type of stuff before and more things than many would attempt Volvos with Ford engines,Diesel S10 and more.
I just wanted...
Leave a comment:
-
Is this just crud or a hole in the dipstick tube on the Vette engine?
...
Leave a comment:
-
I had a multi function switch melt the 4way flashers on an 01 Blazer once. All kinds of things started acting up blinkers tail lights brake lights. I...
Leave a comment:
-
If I recall the vent prevents flooding and vapor lock when the pressure builds up from heat while parked.
When driving the vent lets air in the...
Leave a comment:
-
Looks good you are making progress. I did notice a dowel pin missing on the back of the block to go to the trans hopefully you can get the one out of...
Leave a comment:
-
It is tricky getting in here. At first the login button did not work at all. Now the button works but when i logged in it brought to a blank page with...
Leave a comment:
-
-
That would be a good time to lay a straight edge on top of the valves to check if they are the same height
If not could be a broken valve spring...
Leave a comment:
-
The vacuum gauge was totally useless the needle flying up and down.
Flying needle tells me something is not correct with the exhaust. Worn...Last edited by wrenchn2; November 7, 2017, 04:36 PM.
- 1 like
Leave a comment:
-
Found a project for you during your retirement.
You should have some of these laying around.
https://youtu.be/XmE1VujBxvc...1 Photo
- 2 likes
Leave a comment:
-
That's great to hear about the proton information.
Hopefully we won't need but good to have a plan if needed.
Thanks you don't...
- 2 likes
Leave a comment:
-
I am no lawyer, but if you picked the golf ball up with your hand and accidentally threw through the window, is that a lot different than picking it up...
- 1 like
Leave a comment:
-
Did you happen to notice if the rocker studs are pressing down tight on the pushrod guides.
Since so many broke I am wondering if something is wonky...
Leave a comment:
-
-
Sounds like an Exhaust valve is not opening. Either Rocker is off the pushrod or the cam is flat.
If you can figure out which cyl is missing take...Last edited by wrenchn2; July 31, 2017, 06:15 PM.
Leave a comment:
Leave a comment: