Search Result

[Mr4Speed]

Does it have to be a bearing? If you could find a bronze bushing that was bigger on the o.d. and smaller on the i.d. you could get it turned to size to...

[Mr4Speed]

The window motors on my '86 gave me fits, and it got a lot worse when I replaced the window seals. Almost everything in the window system on those is...

[Mr4Speed]

I've seen such a thing happen where the piston in the combo valve got stuck in one end, and it won't go all the way to one end unless the pedal goes to...

[Mr4Speed]

How about a private/secret group on Facebook that only members know about and have access to?

[Mr4Speed]

I had the same problem with my Olds. Ruined the first bearing forcing it in there, had to hone out the crank until it pressed in with a reasonable amount...

[Mr4Speed]

I don't see any rust so that makes it pretty rare.

[Mr4Speed]

A LOT. Probably pick up a couple MPH too.


What's the RPM in the traps?...

[Mr4Speed]

That's a nice truck.

[Mr4Speed]

I would set the parking brake, put trans in neutral, grab the driveshaft and see how much it turns just to double check. Sounds like that can travel right...

[Mr4Speed]

I like the white around the windows like the one in the pic. I can see how if it didn't have some kind of two tone treatment it might look really short...

[Mr4Speed]

Damn-that sucks. And of course it would never have happened if the car wasn't so nice.

[Mr4Speed]

MDF is usually the best value for something that has a hard smooth surface.

[Mr4Speed]

I prefer running them under and up behind the heads. It's pretty easy to do with the engine on a stand, pretty hard with it in the car.

[Mr4Speed]

I don't think it's as simple as the UAW pushing wages too high, but the deals they got to pay too many people to do nothing or very little-to force the...

[Mr4Speed]

Glad you came out of that with all your appendages Cobey-that's scary stuff.

I hate cabinet saws. I've had them throw a 90lb. sheet of melamine...

[Mr4Speed]

Did it run okay before and start doing this, or has this carb always done that on this engine?

I would check for a heavy/leaking float and...

[Mr4Speed]

Do you still have a functioning air pump on the engine? Carb engines with air pumps have a decel diverter valve to prevent that-EFI engines don't need...

[Mr4Speed]

Inner liner/safety spare. There's basically another complete tire inside there.

[Mr4Speed]

Isuzu NPR swap kit here-

http://www.isuzudieselswapper.com/

[Mr4Speed]

Didn't they make those for export with diesels in them?