Announcement
Collapse
No announcement yet.
Search Result
Collapse
500 results.
Keywords
Members
Tags
-
talked to a guy in middle Michigan from a Craigslist ad who said he would trade me a good hemi motor for the 07 for the body, but no way would he try...
-
Just the 4, I would think the seats would be trashed if it got all the way up to the steering column and I would see mold on the door panels. The ECU...
Leave a comment:
-
Not from the sale, not on the title, but there is a chain of change hands from the original texas title, so it could have been a way to eliminate filing...
Leave a comment:
-
I had to put a good battery in the car since the massive AGM does not hold a charge. The water line is half way up the little tub that holds it under...
Leave a comment:
-
ECU, Modules, controllers
So I got this really clean 2011 Jeep Grand Cherokee thinking I might get a 5.7 hemi that I can actually drive. Really clean, moldy carpet, flooded battery...
-
Thanks, I got thru to Walker, gave them the part number to the y pipe with cats that were stock on the vehicle, explained I changed heads so it changed...Last edited by anotheridiot; April 3, 2024, 02:26 PM.
- Likes 2
Leave a comment:
-
Cats
So, still fighting this eagle head swap 2007 5.7 hemi. New problem is entire odd bank is misfiring, i.e. bad information from o2 sensor and dumping fuel....
-
which is why I suggest jacking the nose up or to the side of the overflow tank. He has tried just about everything else imaginable....
Leave a comment:
-
Maybe just get to simple answers, like jacking up the vehicle as high as you can so you can force the air forward where it can escape. I bought one of...
Leave a comment:
-
I guess you will see the pulley, it will either be smooth for the under route or toothed with the over belt route.My son is pushing hard to find an LS3,...
Leave a comment:
-
do all LS water pumps spin the same way? Have you tested the radiator cap? I use our tester pump more than one would think. You can get a knock off on...Last edited by anotheridiot; February 27, 2024, 07:00 AM.
Leave a comment:
-
I got a pad mounted one next to the casters on my recycled I beam frame table that stops it from rolling. I thought I got them from MSC direct or Zoro,...
Leave a comment:
-
its so much easier when they are 3 phase motors. First thing you have to do is make sure your motor is CW/CCW because that was my first mistake. After...
Leave a comment:
-
Just amazing what should be the most simple task is made so difficult. I blame alot of it on not having a crossover in manifolds anymore, but the way...
Leave a comment:
-
Its amazing how much cooling that little pee hole in the thermostat does with the coolant in these cars. Have you also changed the temperature sensor?...
Leave a comment:
-
yeah, I have gone over that many times. To get the valve cover off, I removed the wires from the top of the motor I could reach, but there are three sets...
- Likes 1
Leave a comment:
-
Pulled the fuel line and yes, the fuel pump works for those 2 seconds if the PCM, PCU (POS) does not see a crank and cam signal the automatic relay engages...
- Likes 1
Leave a comment:
-
pretty sure the manual says to leave the radiator hose connected to the engine to make sure the block is full of coolant. There is no problem getting...
Leave a comment:
-
Thing is, you have a system that kills spark and fuel, how do you verify its the system before changing all the spark and fuel pump stuff? I do not see...
Leave a comment:
-
So, I was worried about collapsing the lifters, so I pulled the fuel relay and turned the motor over, then went and did the drivers side, then did the...
Leave a comment:
Leave a comment: