Announcement
Collapse
No announcement yet.
Search Result
Collapse
14 results.
Keywords
Members
Tags
-
So, small update, customer informed me that the transmission is stuck in 3rd gear, something I didnt notice last time I had my scanner on it. Is "3rd...Last edited by Eds_Automotive; January 23, 2020, 07:02 PM.
-
1999 4L60 in a 2004
Hey folks. I have a customer that brought me a 2004 Trailblazer 4x4, slips when it tries to shift into 3rd but if you get it going fast enough in 2nd...
-
Last time I checked, the TPS was sweeping normally as I applied the throttle in the datastream. Ill check again in the morning...
Leave a comment:
-
I can see why you had so many problems, the 2006 is a big step from the 2003-2005 so that makes sense. On this one, the range switch only has two connectors,...
Leave a comment:
-
Ive never heard of that many problems on a 4L60, I know they went through some changes but wiring should be pretty consistent. However, I dont have a...
Leave a comment:
-
But would this occur ONLY when you let off the throttle? I can rev it to the moon and back in park, its only in gear under a load and only when you let...
Leave a comment:
-
Yea, its an aftermarket tune on an updated style PCM, LS1 mapping possibly. The engine is out of a 1998 motohome, and its fuel injected. Im going to check...
Leave a comment:
-
The codes, as stated, are for the "trans range switch" and the crank relearn. The trans switch wont go away for some reason to be able to do...
Leave a comment:
-
The auto detect on my scanner pulls it up as a 1999 Tahoe 5.7, I think its an LS1 map, maybe. Not sure how they do it....
Leave a comment:
-
Fuel pressure is fine, and I can rev it all day long. Its when I have it in gear with the brake on I can torque it up to about 2k RPM, it holds no problem,...
Leave a comment:
-
Voltage drop is not the issue, its getting 14.2v even when its in gear and under load. Going to run through grounds again, it seemed to happen less or...
Leave a comment:
-
Still looking for ideas. I have never had this happen before, any help is appreciated....
Leave a comment:
-
It doesn't seem like its doing that, I imagine it would be more of a sputter kind of stall. Plus, when its in drive or reverse, it moves just fine until...
Leave a comment:
-
1999 Tahoe Stalling Issue
Hello. I have an automotive shop in Florida. My customer brought in a 1999 Tahoe with a blown engine, and long story short we went ahead and dropped in...
Leave a comment: