Brake fluid vanishing

[JOES66FURY]

Went down to look at it today. Saw that brake fluid was spilling down the sides of the master. I dried it off, then pumped the brakes a few times. More fluid on the sides. Looks like it's pushing past the lid and gasket. The bale that holds the lid down was extremely easy to remove. Too easy. So I tightened it up by bending it. I also noticed it looked as if the gasket was in the lid upside down.

Hopefully, it was something this stupid easy. But, at least, I got Gregg to open the hood of his car now and again before he it breaks down.

Scott, I had this issue with my blue Ram, it was driving me nuts. after a month or so of driving it would be half way down. I checked everything and found that there was an issue with the cap. I replaced the cap and seal and the issue went away. Some times the fixes that are to easy are the hardest to accept.

[Scott Liggett]

Its an old school iron master with a metal top. The bale was so easy to remove. Just pull to a side with fingers. Most I've dealt with needed a screw driverr to pry it off. Anyways, Gregg will watch this week and see it is fixed. If not, we will continue the investiigation.