Announcement

Collapse
No announcement yet.

Ford COP

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ford COP

    Hey guys,

    Anyone know where I can get new plug ends (just the plastic ends, not a pigtail) for the Ford COP's? I snapped 2 of the clips on my Lincoln's when changing the coils and plugs and am now holding the plugs in with zipties.

    Thanks,
    Central TEXAS Sleeper
    USAF Physicist

    ROA# 9790

  • #2
    Napa can order most replacement plugs but you will need to take the coil in with you to match it up

    Comment


    • #3
      If you're after the "boot", Rock Auto should have them for around $4.

      Comment


      • #4
        I'm not the best with our parts system - I had one of the guys in the garage look it up - and he can't come up with separate part number listings - just the whole coil assembly.
        There's always something new to learn.

        Comment


        • #5
          The boots are fine, the coils themselves are brand new but the clips on the harness broke the internal catches so I had to zip tie them on. I need the new plastic plugs or a pigtail that I can pull apart and get the connectors off of. The wiring is fine, just the plastic catches are broken.
          Central TEXAS Sleeper
          USAF Physicist

          ROA# 9790

          Comment


          • #6
            Contact your local Car Quest, if they don't have em,
            they can certainly work with the dealers and get them for you.

            That's who I've gotten them through.

            Comment


            • #7
              junk yards are full of them..

              Comment


              • #8
                Originally posted by Stich496 View Post
                junk yards are full of them..
                Ready to break...just like his.

                Comment


                • #9
                  Originally posted by min301 View Post
                  Ready to break...just like his.
                  Thanks for smacking him down like a professional!

                  thanks for the tip on CarQuest, loved the one in my hometown in TX. Hopefully the guys here are the same.
                  Central TEXAS Sleeper
                  USAF Physicist

                  ROA# 9790

                  Comment


                  • #10
                    Originally posted by CTX-SLPR View Post
                    Thanks for smacking him down like a professional!

                    thanks for the tip on CarQuest, loved the one in my hometown in TX. Hopefully the guys here are the same.
                    well, if you're not a bull in a china shop. they come out fine, and the price is right..
                    a few sec. blast from a plumbers torch and they don't break..
                    mr ford , min should know this..

                    Comment


                    • #11
                      Originally posted by Stich496 View Post
                      well, if you're not a bull in a china shop. they come out fine, and the price is right..
                      a few sec. blast from a plumbers torch and they don't break..
                      mr ford , min should know this..
                      Actually, they crumble all the time,
                      did when I was in the Ford shop,
                      they crumble on many techs all over the place.

                      Best to replace them with new.

                      Comment


                      • #12
                        Originally posted by min301 View Post
                        Actually, they crumble all the time,
                        did when I was in the Ford shop,
                        they crumble on many techs all over the place.

                        Best to replace them with new.
                        yes best, but I'm a cheap sob so when I go to the j/y I grab 8, came in handy on the 99 4.6

                        Comment


                        • #13
                          UMM dealer ???

                          Comment


                          • #14
                            I have never broke a coil one , normally the injector clip breaks. but I can get the ford part number for you if you still need it.
                            Reading , Pa
                            Good Guys rodders rep.
                            "putting the seat down is women's work" Archie Bunker.
                            Ban low performance drivers not high performance cars .

                            Comment


                            • #15
                              He's talking about the pigtail connector.

                              Comment

                              Working...
                              X