Chevy 2.8 / IH Cub tractor project

[Dan Barlow]

P.S. The temps really dropped after that .In the teens at night and around 20 during the day , so the snow has been very very slowly going away . Had...

[Dan Barlow]

We had a 8 inch snow a couple weeks ago. I needed it . When we bought our house 4 years ago I thought it would be great to have a snow blower that mounted...

[Dan Barlow]

Loser...

[Dan Barlow]

Looks excellent. Anything worth doing is worth over doing if it makes you happy.

[Dan Barlow]

We've not had any experience with Glass America .
Safelite we are running 50/50 on chip repair with Safelite.
We had one replacement windshield...

[Dan Barlow]

Goofing around with the stuff . ...

[Dan Barlow]

I went out a hour away to pick up brand new HEI distributor that I assumed was for a Chevy V8 . I get there and the guy mentioned it had a short shaft...

[Dan Barlow]

Apart...

[Dan Barlow]

Edelbrock 2.8 4 barrel intake . ...

[Dan Barlow]

Here is what I'm starting with . A Cub Cadet 126 Kabota wheels and tires that are about twice as large as stock .

[Dan Barlow]

We talked about this some on the Iron Duke thread , but I should probably talk about it here . What I basically want to end up with is a 50 % larger cub...

[Dan Barlow]

That a pretty tractor !

[Dan Barlow]

I've taken awhile to answer this one . I'm sorry . Here are the goals and the reasons for the tractor project .

I think to start with ,...

[Dan Barlow]

The whole point of buying this intake was to put a four barrel on this engine. ( Even though it doesn't need one ) This is a two piece intake that the...