User Profile

[fatguyzinc]

been lauhing my fat @ss off at uncle rob for a couple years now--
"then, fill it with gasoline"............

[fatguyzinc]

this, right here.
the gospel truth.

...

[fatguyzinc]

got lucky for xmas, various peeps gifted me with amazon gift cards from $25 to as big as $100,
so i ordered 2 of these--
https://www.amaz...

[fatguyzinc]

maybe here--

http://www.thewheelsmith.net/

or possibly here--

https://www.wheelvintiques.com/

[fatguyzinc]

even the stock springs are most likely noodl-ish at this point. changing springs not that bad
even in car---50ft of 3/8 nylon rope in the plug hole,...

[fatguyzinc]

hey---- i resemble that remark...........

[fatguyzinc]

.............................

...

[fatguyzinc]

jack the front end up 6 inches so it looks like a gasser................................

[fatguyzinc]

of course not. any cam even a mild one should have all the correct "supporting actors" installed along with it.
this includes (but is...

[fatguyzinc]

if thats really what hes got then yes he needs small chamber heads FAR more than a cam.......

[fatguyzinc]

short duration, hi lift, short LC. anything over 110 is a crutch on the LC, to compensate for too much duration.
comp cams grinds on a 110, the...

[fatguyzinc]

thats a 308/319 duration, id NEVER run that in anything i needed to tow with or daily drive.
better off with short duration/high lift/short LC,...

[fatguyzinc]

if youre using the 200R4, dont they make hi stall converters that still lock for freeway use?
i agree with too much stall burning up transmissions...

[fatguyzinc]

swap that vortec for a big old nasty rat and you'll never worry
about getting enough heat in the cabin again...though my vette sits
on the...

[fatguyzinc]

this would be why im not a pornstar..................

[fatguyzinc]

my new years resolution is to date more supermodels...
ok, to date even regular models.
ok, just to date more women in general.
ok,...

[fatguyzinc]

i dunno, i like this one better--though it may get removed
for being vulgar....though i DID censor it............

...

[fatguyzinc]

i used this one

https://www.amazon.com/Flex-lite-415.../dp/B00029J3WU

no spacer mount direct to pulley and it kept...

[fatguyzinc]

stacked plate is better than tube/fin, and its almost impossible to "overcool" an automatic
transmission--just like its almost impossible...

[fatguyzinc]

from the sound of that run you need a shift kit or a valvebody BAD--
unless it was spinning on the shifts, in which case disregard that.....