Tweet
Do you have a part number on the short delco's
-
Hard Work Guarantees Nothing - Lack of it Does!
Drew Gerth - Newburgh, IN -
Originally posted by 91CCFirebird View Post
I am a bit confused to what engine you now have and in what car. Seems you have both an S10 with aluminum heads and the 91 Firebird.which coukd hqve either.BS'er formally known as Rebeldryver
Resident Instigator
sigpicComment
-
Sorry for the confusion. The s10 is what the firebirds new motor came out of. It does have aluminum heads so it needs gasket style plugs instead of tapered ones. They are also 14mm with a .750 reachHard Work Guarantees Nothing - Lack of it Does!
Drew Gerth - Newburgh, INComment
-
Been a while on an update
first start (Click picture to play)
Last edited by 91CCFirebird; October 18, 2013, 08:13 PM.Hard Work Guarantees Nothing - Lack of it Does!
Drew Gerth - Newburgh, INComment
-
Sounding a little better here
click to play
- low end is good but lots of spark knock at higher RPM's
- bought a cord to plug it into a computer and record engine vitals while the car is running to send with chip back to tuner
- new coil and MSD box also purchased to help boost spark
- stay tuned for tuning updatesLast edited by 91CCFirebird; October 18, 2013, 08:18 PM.Hard Work Guarantees Nothing - Lack of it Does!
Drew Gerth - Newburgh, INComment
-
Chip back in and running well. Will get video after it warms up a bit.Hard Work Guarantees Nothing - Lack of it Does!
Drew Gerth - Newburgh, INComment
-
Warmed up yet ? LOLPreviously HoosierL98GTAComment
-
Oops. Will have to work on that. Driving it a couple times a week. BMW has been getting all the $$$ attentionHard Work Guarantees Nothing - Lack of it Does!
Drew Gerth - Newburgh, INComment
-
Was greeted this spring with a power steering leak. Replaced pump and lines. No more drips/pour of power steering fluid.Hard Work Guarantees Nothing - Lack of it Does!
Drew Gerth - Newburgh, INComment
-
Somewhere along the way the new torque arm, transmission mount and driveshaft loop got left out. Here is a pick from UMI, on car pick will come next time I have it on the lift.
Hard Work Guarantees Nothing - Lack of it Does!
Drew Gerth - Newburgh, INComment
-
I always wondered if you could feel a real difference in a tubular one or is it all just more for the adjustability of pinion angle ?Previously HoosierL98GTAComment
-
I don't know how much I can "feel" it but I was able to eliminate a vibration I had before it.Hard Work Guarantees Nothing - Lack of it Does!
Drew Gerth - Newburgh, INComment
-
I chased those too. I bought a tubular panard bar . It felt better but my virbration was from flat spoted tires fromvthe front brakes not working right . They look pretty .Previously HoosierL98GTAComment
-
Is traction better?Comment
-
Hard to say as the torque arm went in at the same time the new motor did.Hard Work Guarantees Nothing - Lack of it Does!
Drew Gerth - Newburgh, INComment
Comment