I need to put this stuff in just one spot... so here it is.
Tonight, started on the lift
first, use your crane to set the uprights in place
![](https://i.imgur.com/DJBaIxLh.jpg)
so, joking aside, siting is the biggest challenge. Here it's square to the door
![](https://i.imgur.com/xBTOfIgh.jpg)
that doesn't work because it crowds the driver's side and really limits length
not just that but it puts one of the uprights about middle of the rear door
next step... 'draw' a straight line to the rear door
![](https://i.imgur.com/LsXkDguh.jpg)
move cars and tape mark the floor
![](https://i.imgur.com/pddSydGh.jpg)
move stunt suburban into place
![](https://i.imgur.com/VwvSPIch.jpg)
both sides have plenty of room for activities - all while keeping the right post out of the way
![](https://i.imgur.com/uoNhijFh.jpg)
Next up, fix the bent cross brace (I guess you can't pick the lift up with it.... ah well)
the drill the floor for bolts. I might move it back a little bit - but even as I type this, I think "no"... it seems like you never have enough room around the lift, so keeping that clear is likely going to be the answer
Tonight, started on the lift
first, use your crane to set the uprights in place
![](https://i.imgur.com/DJBaIxLh.jpg)
so, joking aside, siting is the biggest challenge. Here it's square to the door
![](https://i.imgur.com/xBTOfIgh.jpg)
that doesn't work because it crowds the driver's side and really limits length
not just that but it puts one of the uprights about middle of the rear door
next step... 'draw' a straight line to the rear door
![](https://i.imgur.com/LsXkDguh.jpg)
move cars and tape mark the floor
![](https://i.imgur.com/pddSydGh.jpg)
move stunt suburban into place
![](https://i.imgur.com/VwvSPIch.jpg)
both sides have plenty of room for activities - all while keeping the right post out of the way
![](https://i.imgur.com/uoNhijFh.jpg)
Next up, fix the bent cross brace (I guess you can't pick the lift up with it.... ah well)
the drill the floor for bolts. I might move it back a little bit - but even as I type this, I think "no"... it seems like you never have enough room around the lift, so keeping that clear is likely going to be the answer
Comment