.
.

the car junkie daily magazine

.

Car Feature: Lee Sicilio’s 283 MPH 1969 Dodge. Can He Run 300 In 2013? We Think So!


Car Feature: Lee Sicilio’s 283 MPH 1969 Dodge. Can He Run 300 In 2013? We Think So!

(Editor’s note: We ran this feature after Speed Week last year. Since the car will be back and the boys have an excellent shot at making a 300mph pull down the salt, we wanted to re-familiarize you with Lee Sicilio’s amazing 1969 Charger Daytona. Take a couple minutes to read the story, even if you have before and check out the photos. Pushing a stock bodied car to 300mph is pretty insane and you’ll feel that too when you see the effort that Lee and boys have put in on this deal. They went 273 on their first time to the salt in the car last year….this year we think that they have the suds for 300. Stay tuned….we’ll keep you posted!)

Lee Sicilio is a Texan with a penchant for Salt. His friends will tell you that nobody uses it on the rim of a Bloody Mary better, but they’ll also tell you that his drink making skills pale in comparison to his love of the salt at Bonneville. With numerous records behind the wheel of his 1969 Dodge Daytona “Wing Car”, it was no surprise that three years ago he and a very skilled group of guys decided they wanted more. As in 300 mph. And despite hearing from multiple people, including Hot Rod Editor-In-Chief David Freiburger, that another 1969 Dodge Daytona was the wrong car to go 300 plus mph in, Lee just couldn’t help himself. The resulting 300 mph effort is arguably one of the cleanest door cars to ever grace the salt, and when you consider that Macdonald & Pitts and Lindsleys & Leggitt in their swoopy 4th Gen Firebirds are racing in that same category, that is saying something. Sure the 4th Gen GM Firebirds and Trans Ams are aerodynamically a better start, but for a guy like Lee easy isn’t always good. For that reason alone, Lee and his Dodge are seriously BangShift approved. We won’t argue with using a muscle car, and an iconic one at that, for speeds that most will never imagine attaining. We probably should, but we won’t. Especially when you consider that with only 5 runs on the car they set a record at this year’s Bonneville Speed Week in the A/BGALT class at 273.514 mph.

(Click here to see all 102 photos of Lee’s Daytona)

The Man: Lee Sicilio is a big big man. Not in stature, and not in fame, but most certainly in attitude and character. With Motorhead, Mr. Horsepower, and Bonneville 200mph Club tattoos on his back and arms, they pale in comparison to his entertaining persona. He’s always the life of the party, the king of storytelling, and the guy that is always on top of filling your drink. Part jester, part bartender, all racer. And as you would expect, behind the man is one hell of a woman. Jan, Lee’s wife of 19 years, is always there with support at home, words of encouragement in the pits, a squeeze of the hand and knowing look before each run, and a kiss to celebrate at the top end.

He may not be the biggest name in land speed racing, but when his Daytona goes 300 mph with him in it he’ll be bigger than life. Especially when he trades that red hat in for a blue one.

I swear the reason he drives so fast is to get to the kiss from Jan, his wife of 19 years, that much quicker.

The Team: Lee may be a big man, but he’s smart enough to know that taking on records that potentially mean 300 plus MPH speeds means you need a good team. And through smart choices, luck, and a bit of right place at the right time, Lee has put together one hell of a team. With Scott “The Geek” Clark handling the wiring chores and tapping the keys that control the tuneup and data logging from the DIY Autotune MS3X Megasquirt System, this bad boy is making good power and giving the rest of the crew the data they need for keeping all the mechanicals happy. At the heart of the mechanicals is a one-off double Bill E. Badass chassis designed and built by Ryan Fain of Brink Racecraft. Ryan’s name is synonymous with Outlaw Promods and super fast street cars, so getting this thing to hook on the salt was his personal mission. He’s done a great job on a chassis that rivals any we have ever seen and his role as Car Chief suits him incredibly well. Driving the push truck, belting Lee in, and being the overall voice of reason is Crew Chief Randy Hughes. His patient nature, ability to herd Lee, quiet wit, and overall respect for everyone involved in the project makes for a smooth running team that always seems to be moving in the right direction. Randy is also responsible for the paint job on this car, which was originally scheduled to show up in simple primer, but Randy refused to bring the car out in anything other than a respectable paint job, so he worked around the clock for three weeks to get the job you see here done.  Each member of the team has a definite skill set and each member recognizes what things are their responsibility and their area of expertise. We consider ourselves lucky to call each of these guys friends, and to have been allowed to be honorary members of the team for Speed Week 2012. We would however be complete idiots if we did not mention Matt Cramer and Jerry Hoffman from DIY Autotune who also worked tirelessly on the car this year, as well as Misty (Randy’s much better half), Randal Burns and his better half Melissa, along with all the Texas contingent who were there for support and to help drink Lee’s booze. Special thanks has to go to Neil Roberts who took time away from his day job as head aerodynamicist for CART and IndyCar Teams to work on this project as well. His input on attitude of the car, rear wing angles, air dam, exhaust, etc. was critical in completing the car.  Neil also performed on-the-spot “oil droplet” testing to visualize the airflow around the car.  Surprisingly, the results were better than expected, and he is now more optimistic than ever about the cars potential performance.

The team, getting ready for a run. From Left to Right: Scott Clark, Randy Hughes, Jan Sicilio, and Ryan Fain.

 

The Engine: The 498 cubic inch Hemi powering the Daytona was screwed together by Lee’s longtime engine builder and good friend Ray Barton. Ray is known for building killer HEMI combos for the heavily contested HEMI Super Stock class in NHRA competition, although he has never been a big fan of EFI. That all changed when Ray, his son David and Scott started working on more and more interesting customer projects that required EFI. With Barton’s decades of HEMI building experience, and Scott’s ability to make big steam with turbos, there was no doubt that a pair of Precision 91mm Pro Mod turbos were in order. Knowing that 300 plus mph was going to take a lot of power, Barton built the engine to handle as much as 3500 horsepower, by using a Keith Black “water block,” a Bryant crankshaft, a bulletproof rotating assembly, and a Barton-spec’d cam and valvetrain. The big turbos feed a Barton Cast Intake Manifold, and boost is controlled by 60mm Tial Wastegates and Blowoff Valves. All of this is controlled by the aforementioned DIY Autotune Megasquirt MS3X, providing sequential fuel and spark to each cylinder. Ignition is handled by 8 Pantera IGN-1A coilpacks and the fuel injectors are 225 lb/hr Injector Dynamics nozzles good for 2800hp on gasoline.  On the chassis dyno Scott made 1500 hp at the tires with only 6 pounds of boost before the dyno gave up and said no more. On the salt it only took a couple runs to get the sequential fuel and spark right where they wanted it and yet they still only needed 8 pounds of boost to go 283 mph. That’s less than half the power this combo will make, so we armchair crew chiefs are pretty confident that 310 mph is in the cards.

The Ray Barton built, Scott “The Geek” Clark tuned, 498 inch HEMI makes as much power as you want thanks to twin 91mm Pro Mod Precision Turbos, a custom intercooler, and Megasquirt EFI. Of course, Ryan’s plumbing might have a little to do with it as well.

It takes a lot of tubing to go 300 mph. With this much turbo I would think he could do 400!

The Car: The maze of tubing that makes up the chassis in this car is expertly fabricated, placed, and thought out. Not only does it have more than the safety regulations require, but also has features that make driving, maintaining, and servicing the car much more enjoyable. Plus, it has cup holders! No really, cup holders! Plus a place to hold the laptop for tuning, smart instrumentation that Ryan and Scott worked out to make the task of driving as easy as possible on Lee, and little trick touches that will take weeks to notice. Ryan Fain, the man behind the chassis design and fabrication might actually have thought of everything.  He’ll say there are a few things he wants to add or change, just like any car builder, but this piece is bitchin. Unlike a drag car chassis, land speed stuff needs to be built quite a bit heavier. They typically weight at least 2000 pounds more than their street driven versions, and Lee’s Daytona weighed way way north of 4000 pounds in Bonneville trim for 2012. The scary thing is they can add more than 2000 pounds more weight to the car than is in it now.

Cup holders. Two of them. Coincedence that they hold a koozie or a Martini glass? We think not.

Unlike a lot of Bonneville cars, Lee’s is super easy to get in and out of which is the key to making one of these things safe. With a funny car cage, ISP helmet pads, Simpson belts, Firefox fire systems, NASCAR roof flaps, and Stroud Chutes, this car is ready for just about anything. And to make life easier when pushing it around on the way to the starting line or pits, Ryan even installed air ride. It will lift the front and rear 4 inches each without changing any suspension spring rates because they are only there for lifting. When running down the track the air springs are allowed to inhale and exhale air as they like because they are just along for the ride. Get done with the run, close a couple valves, add air and no worries about smacking the front air dam. Now that’s thinking.

Take a close look, there is a ton going on here. The plates at each rear corner that are standing up support the base of each rear vertical strut.

 

If the details are what matters, then this car should be really good to go.

All the power from the Barton built HEMI is channeled through a Jerico 5-speed NASCAR clutchless transmission and then back to a Winters quick-change rear-end. The rear is suspended by a 4 link with separate coils and shocks, while the front features a one-off Ryan Fain designed dual A-arm suspension with a coil spring and separate shock. All four corners have NASCAR style weight jacks as well. Ryan’s front suspension features some of the biggest spindles we’ve ever seen, along with upper and lower a-arm tubing that rivals most roll cages. This stuff looks more monster truck than race car. When asked why Ryan’s reply was “hell it weighs about as much as a monster truck!”

Check out the front suspension. Note the air ride mounts that will support the car for dragging it around on the salt, but be deflated so that the coil spring is the actual suspension during runs.

Those of you who aren’t familiar with too many race car chassis may not notice some of the features that Ryan has incorporated in this one, but those of you who have been around drag racing AND land speed racing will notice a lot of drag racing influence. Most of that is in order to keep the car safe while also easy to maintain. Ever single thing in this car has a purpose, a place, and good sound reasoning.

Everything has it’s place, and for good reason. Eight firebottles for the fire systems, and one CO2 bottle for the air operated chutes.

Making sure that the outside of the car was just as pretty as the inside was poor Randy Hughes’ job. With only a few weeks to blow this whole car apart, paint it, and put it back together, Randy had his work cut out for him. He’ll tell you that there are parts he wasn’t happy with, and that his pet peeve was the decals that had to be installed since their wasn’t time to letter it, but the car is still gorgeous. The metal work and fabrication that Randy and Ryan put into every component makes for one really sharp looking race car. From the sheet metal in the interior, to the hood, fender openings, and amazing quarter panels, every single panel was finished with purpose and it shows. Starting with a 1969 Charger that had more sheet metal issues that originally planned for meant that Randy and Ryan really had to be on their game to keep the project on track. Sure the planning started 3 years ago, but between the two of them they have nearly four thousand man-hours in this car. And that doesn’t include Scott Clark’s or Lee’s time.

Right where it belongs. Under the sun, and on the salt.

 

How Randy and Ryan got these quarter panels to look like this we will never understand.

Although this is a completely new car, there was no doubt that it would have to be the familiar Orange and Black that Lee’s other Daytona wears. Sure it’s sleeker looking than the old one thanks to the new air dam, hood, lower ride height, etc. But other than the shaved door handles, and the air dam, it is completely Altered class legal, which uses a Production body with minor allowed modifications such as engine set back, front air dam, and a step pan under the body (not a belly pan). We love that, and so does Lee. That would make beating the all time door car speed that much sweeter since everyone else has done it with much swoopier bodies. The current fastest two doorslammers are Macdonald & Pitts at 308.983 (AA/FALT) and Lindsleys & Leggitt at 308.517 (B/BFALT) although Lindsleys & Leggitt actually ran 333 at the middle mile but could not back it up due to engine failure.

Ultimately, Lee Sicilio and his band of merry men and women have put together what may be the best 1969 Dodge Daytona ever built. Sure its turning radius wouldn’t allow you to make a u-turn anywhere in the country, it rides pretty stiff, and the air dam could make turning into driveways a bit of a challenge, but it does one thing better than any Daytona on the planet and that’s HAUL ASS. We dig it, and you know you do too.

When asked about the Twilight Zone reference, Lee replied “The only way anyone will believe a ’69 Daytona just went 300 is if they are entering the Twilight Zone!”

 

Wings are cool.

TO SEE ALL 102 PHOTOS OF LEE’S DAYTONA, CLICK HERE.


  • Share This
  • Pinterest
  • 0

29 thoughts on “Car Feature: Lee Sicilio’s 283 MPH 1969 Dodge. Can He Run 300 In 2013? We Think So!

  1. 75Duster

    Great story, this Dodge Daytona should easily do 300 next year. My congrats to Lee and his crew for hitting 283 in the new car.

  2. JRM

    I know how those quarter panels got to look so good. Brian Bass in Dallas, Texas handled the metalwork on the body.

    1. Scott Clark

      Yes, Brian Bass did a ton of work prepping the body panels on this car. I haven’t met him but the rest of the team say good things about his work.

  3. squirrel

    Great article Chad, I love this car! I’ve been following the build from Scott’s posts on facebook

  4. GuitarSlinger

    I’ve no doubts at all that with a tweak here and a turn of the screw there this killer Daytona will well exceed 300 as well as set a record or two

  5. Tim Young

    I remember when Ryan came out of a bicycle shop 10 years ago. Look at him now! The dude can build some cool stuff!

  6. Scott Clark

    Here’s another article written by Neil Roberts, the team’s Aerodynamic Engineer, a hardcore racer himself and author of the book “Think Fast” – widely acclaimed as a Must Read for any roadrace car builder or driver.

    Like Chad, Neil did a good job of capturing the team dynamic that allowed Lee’s new car to perform well:

    http://thinkfastengineering.com/2012/08/its-a-we-deal/

    1. Scott Clark

      1.5 – 2.0 gallons for warmup, staging, and a 5 mile pass at the current speeds. Might see as much as 3.0 gallons per 5 mile pass at speeds above 300mph, if we get there.

  7. Gameshows

    Thank you a lot for sharing this with all folks you actually realize what you’re talking approximately! Bookmarked. Kindly additionally consult with my site =). We could have a link change arrangement between us

  8. tanks

    I’ve learn several excellent stuff here. Definitely value bookmarking for revisiting. I surprise how much effort you put to make any such great informative website.

  9. ATT SYSTEMS

    Attractive part of content. I simply stumbled upon your weblog and in accession capital to say that I get actually enjoyed account your blog posts. Any way I’ll be subscribing to your feeds and even I success you get admission to consistently quickly.

  10. Weight Loss

    I feel this is one of the most significant information for me. And i’m satisfied studying your article. But want to remark on some basic things, The site style is perfect, the articles is in reality great : D. Just right job, cheers

  11. Internet Marketing Tips

    You’re in reality a excellent webmaster. The web site loading speed is amazing. It kind of feels that you’re doing any distinctive trick. In addition, The contents are masterpiece. you’ve performed a wonderful process in this topic!

  12. DIY Hot Water

    Attractive section of content. I just stumbled upon your web site and in accession capital to say that I acquire actually loved account your weblog posts. Anyway I will be subscribing to your feeds or even I fulfillment you access constantly rapidly.

  13. Dave Bloomberg

    Last year I did some of the Timing on race courses 3 & 4, then later had a chance to meet Lee and see his beautiful car while it was in in-pound, his car is fantastic and you’ll never meet a nicer guy than him, for this Speed Week I wish him success and if when he gets to very hi speed and the car does not handle to his liking deploy the chute and add more ballast for safety, never let the car spin out and go backwards with the rear spoiler catching air, enjoy the race Lee, Dave (Avanti Kid Racing)

  14. Dave Macdonald

    I like what he is trying to do. The big 3 was an elusive # for a long time. I think we will be the only non-supercharged car to be in that club for quite awhile. Good luck to you and keep the sunny side up. Dave!

  15. Lyle Larson

    What a Ride! It’s amazing to incorporate all these ideas and bring it to reality! Wish I were driving it, no stone has been left to overturn……………….WOW

Comments are closed.