.

the car junkie daily magazine.

.

Atomic EFI Throttle Body Users Check This Out. Racepak Has A New V-Net Module That Connects Atomic To Everything!


Atomic EFI Throttle Body Users Check This Out. Racepak Has A New V-Net Module That Connects Atomic To Everything!

Okay, maybe not everything, but to everything Racepak makes! This small harness works with the sensors that you already installed for the Atomic Throttle Body EFI installation, and feeds all those sensors data to Racepak devices. The cool thing is this works for everyone from the hot rod and street rod guy all the way up to someone wanting to log data in their Atomic EFI Equipped Pro Touring or Drag Car. Now you can get a Racepak UDX Dash and plug it right into the Atomic EFI and have complete guages. Or plug it into a UDX, V300SD Data Recorder, and a Smart Wire and have the ultimate control over everything electronic in your car, and have the ability to log everything it’s doing. And if you purchase an Atomic V-Net Module, at the same time that you order your UDX Atomic Street Dash, it will come to your door configured and ready to run. You can install it in minutes!

Remember one other thing. The Racepak UDX Dash is just that, a complete Dash. It’s not just gauges. It includes high beam indicator, turn indicators, programmable warning lights, and even a Parking Brake light to let you know you left the ebrake on!

For more information on this and any other Racepak products, visit Racepak.com

Racepak Releases New V-Net EFI Module for MSD Atomic TBI
Rancho Santa Margarita, CA; June 13, 2014:  Given the immense popularity of the MSD Atomic TBI, Racepak now provides the ability to connect any of their V-Net data recorders, digital dash displays or Smartwire to the Atomic TBI, for data acquisition, monitoring and recording purposes.
Building on the plug and play simplicity of Racepak’s V-Net Technology and eliminating the need for duplicate sensors, the Atomic TBI V-Net module provides the following data channels:
  • Air/Fuel Ratio Gasoline 
  • Battery Voltage
  • BLM Status
  • Closed Loop Status
  • Coolant Temperature
  • Cooling Fan 1
    Atomic TBI Interface V-Net Module
    PN 230-VM-EFIAT
  • Cooling Fan 2
  • DTC Counts
  • Engine RPM
  • Fuel Pressure
  • Fuel Pressure Status
  • Fuel Pump Cavitation Status
  • Idle Air Controller Position
  • Ignition Timing
  • Injector Duty Cycle
  • Manifold Pressure
  • Manifold Temperature
  • Nitrous Active Status
  • 02 Sensor Status
  • Throttle Position
The Atomic TBI V-Net module can be used alone or in conjunction with any of Racepak’s V-Net sensors.
PN: 230-VM-EFIAT
 Available direct from Racepak or any authorized Racepak dealer.

To learn more about Racepak visit RACEPAK.com or call (949) 709-5555.

Founded in 1984, Racepak has been the most recognized name in data acquisition for 30 years. The company designs, develops, tests and manufactures its entire line of dashes, sensors, loggers, software, gauges, modules, cables and ancillary equipment from its headquarters in Rancho Santa Margarita, CA. Racepak is part of the MSDP LLC family.

RACEPAK.COM
30402 Esperanza                                Rancho Santa Margarita, CA  92688                            (949) 709-5555


  • Share This
  • Pinterest
  • 0

One thought on “Atomic EFI Throttle Body Users Check This Out. Racepak Has A New V-Net Module That Connects Atomic To Everything!

Comments are closed.