Chevrolet’s famed C10 Pickup came to life in 1960, but the 1967-1972 has typically been the most sought after. Until now that is. Recently, the first generation C10, years 1960-1966, are becoming more and more popular and for good reason. Just look at this super bitchin 1963 Chevrolet here.

Laid out on air ride, with a highly modified chassis utilizing Porterbuilt components, this thing sits down right on the ground. To us that means it sits down just right. As you would expect, it also has an LS Swap, big brakes, air conditioning, killer mods to account for the new stance, and more.

Here is all the info from the seller:

This truck is a frame off build and complete goes through. It is an original short bed truck and spent much of it’s time (if not all) in Arizona. The paint is not original, but is a 20 year old paint job that gives it that patina look. Below is a list of all components used on the trucks / specs. The truck is currently for sale locally, so if reserve is not met, the auction may end early. The truck is a driver, and has been driven about 7,500 miles in the past 2 years since it’s completion. I would not hesitate to drive this truck cross country, and has made a few trips to northern CA and back from Phoenix. Everything works as it should on the truck, and no corners cut with the products installed.

Feel free to contact me with any questions or any additional information.

Call Travis at (714) 213-4035

Body:
Original ’63 Chevy Short Bed Truck
All New Weatherstripping and Glass
All New Sense Trim w/ Original Side Moulding
Brushed Accents
One-Piece Windows

Drivetrain:
5.3 LS / 4L60E from a 2006 Tahoe
Texas Speed 224R Cam w/ Comp Cams Push Rods & Valve Springs
Yank 3,000 Convertor
Boyd Welding EFI Tank w/ Aeromotive Stealth 340 Pump Inside
All Plumbed with Braided Hose and AN Fittings
All Professionally Dyno Tuned by Pro Dyno in Phoenix (Also did harness)
12-Bolt Rear End with Eaton Posi
Moser Gears and Axles
Entropy LS Radiator w/ Dual Fans

Suspension:
Porterbuilt Level 3 System Front / Rear
Rack-n-Pinion Steering
Slam Specialties SS7 Front Bags / Firestone F9000 Rear
Trailing Arm Rear w/ Outboard Bags
AccuAir E-Level System
VIAIR Dual 444C Compressors
DOT Brass Fittings w/ DOT Line

Brakes:
Front Baer Pro+ 6-Piston Brakes on 14″ 2-Piece Rotors
Rear Baer SS4+ 4-Piston Brakes on 13″ 2-Piece Rotors
CPP Modular Spindle

Wheels:
Hot Rods by Boyd 20″ Spartan Wheels
Brushed w/ Titanium Pockets
Brushed Outer
Clear Coated for Easy Cleaning
Nitto NT555 Tires

Interior:
Dakota Digital VHX Gauges
OBDII Module to Read Trans Temp / Shift Indicator
Vintage Air AC System
Ididit Tilt Column
Hot Rods by Boyd Steering Wheel
Seat Re-DOne in Leather / Cloth
Door Panels Covered in Same Material
Kick Panels w/ Same Material
Small Console w/ Cup Holders and Touchpad Holder
Kicker Bluetooth Stereo w/ Single 10″ Sub
4″ and 6×9″ Kicker Speakers

$42,000