Category Archive: FUNNY STUFF, TECH, Tech Stories, Tools, Videos
Project Farm Is Featuring The 10 Worst Items Ever Tested? Let’s Find Out What They Are And How Bad They Were!
Project Farm and the Torque Test Channel are two of our favorite tool testing YouTube channels and we feature their videos pretty regularly because they are thorough and entertaining. But we all know...
Building a PERFECT METAL SHAPING Station. EASY 2 SET UP. Customizable for YOUR TOOLS With Karl Fisher From Make It Kustom!
In his most recent videos, Karl has been showing how to build your own shrinking and stretching tools using mostly scrap and they have been awesome. When you combine them with all the other tools and...
Daniel and the Crew at Powell Machine Show How To Rebuild Gen 3 HEMI Heads The Right Way. Valve Job, Surfacing, And Removing Broken Bolts
Powell Machine Inc. is known for building some pretty impressive engines, and for being experts in valve train and lifter technology, particularly in those classes of racing that require a flat...
Dirthead Dave Installs A Sliding Ragtop And Shaves The Gas Door on the Bagged Mustang II Project!
If you haven’t ever wanted a sliding rag top in a vehicle then you are a weirdo. I’ve never been a sunroof guy, but a sliding rag is pretty damn cool. I think a VW bug or bus with a...
The Torque Test Channel Tests Out Big Boy 3/4″ Impacts: Modded DeWALT v Metabo, TEMU v Amazon
Cordless impact guns are insanely strong in 1/2″ sizes, but what about these giant 3/4″ bad boys? And do any of these cheap ass tools from Amazon and TEMU actually have any merit? Is it...
Aaron Shows How To Make The HOLE For His Brilliant Legless Tool Stand And BIG Improvements To His Storage System
If you missed this brilliant tool storage and use system that Aaron built for handling many of his stand mounted tools in his small two-car garage, use the link below to check that video out too and...
Karl Fisher From Make It Kustom Shows Us How To Make An EASY, FREE, DIY STRETCHER TOOL! HOW-TO Make “REVERSE”CURVED FLANGES on SHEET METAL
In this episode, Karl makes a DIY stretcher tool from some scrap and a cheap tool from Harbor Freight. In a previous video he made a DIY shrinker from scrap he had laying around. With these two tools...
Tearing Down The Blown Up K24 Swapped StanceWorks Ferrari After A Bad Day Of Racing That Threw The Rods Out Of It.
I’ve only blown up a couple of engines in my day, but when you do there is always the disappointment of tearing stuff up, but then once you get over that there is the desire to tear it apart...
Karl Fisher From Make It Kustom Shows Us How To Make An EASY, FREE, DIY SHRINKER TOOL! HOW-TO Make CURVED FLANGES on SHEET METAL!
In this episode, Karl makes a DIY shrinker from scrap he had laying around. And I know I could absolutely do the same thing with junk I have sitting around. I’m sure you can too. And if you...
How to Remove Rust – 6 Easy Ways to Protect Bare Metal With Willomet Motor And Fab’s 1970 Dodge Charger
We’ve all had to deal with rust repair on a project before, but what about the rust that shows up when you start working on something with new metal? I’m talking about two months into...
Building our first customers roll cage for his C10: what we charged & how much profit we made! The Right Tools And Methods Are Key!
Video Description: In this video Matt and Kevin show you how to build a cage to fit a C10 Chevy truck. We start with a custom fitting while the customer is in the C10 truck. To do this we used our...
Did Project Farm Waste $4,000 For A DIY Transmission Rebuild Kit? Or Is This Smart Money To Spend?
Transmissions are one of the things that enthusiasts seem most hesitant to build on their own. Whether you are talking about automatic or manual transmissions, and whether a newbie or the most...
Torque Test Channel’s TOP 10 TOOLS of 2023: Here’s The List Of Tools You’ve Been Waiting For! See If Your Favorites Are On The List!
We’re tool nuts around here and you regulars know that we love how thorough the Torque Test Channel is at testing tools we need. With lifetime tool rankings, legit testing methods, and an...
How To Index Your Bellhousing At Home: It Is Simple And Easy With Just A Few Tools, And Will Ensure Your Manual Trans Works Flawlessly
You ever fight with a manual transmission that just doesn’t want to slide into the clutch and bellhousing? Or one that just never seems to shift as nicely as you’d like? Or one that makes...