.

the car junkie daily magazine.

.

The New Merlin IV Is The Block You Need To Build A Stout 427 to 632+ Cubic Inch Big Block Chevy


The New Merlin IV Is The Block You Need To Build A Stout 427 to 632+ Cubic Inch Big Block Chevy

Our last Big Block Chevrolet was based on a factory block, and while it did the job just fine, we were limited when we lost a couple lifters, the camshaft, etc which then killed the crank. Why? Well because we couldn’t go any bigger without a bunch of work and money that really wasn’t worth spending with the stock block. If we were running a Merlin, that would NOT have been a problem. Which is why we’ve been drooling ever since Jack and the gang at World Products sent us the announcement with all the details on the new Merlin IV block.

You can build one of these Merlin IV blocks with anywhere from a 4.250 bore all the way up to 4.600 inches and still have really nice thick cylinder walls that will stay round no matter what you throw at them. Stuff a 3.76 stroke crank in it and you can build something as small as a 427. Throw a big stroke into the big bore tall deck version and you’ll be able to build 632 plus inches.

There are a BUNCH of new features, even better casting, machining, and more in the new Merlin IV. It’s completely made in the USA, and ready for your next project.

Check out all the details below, and start drooling like we are.

World Products All New Merlin IV Block 

World Products has completely redesigned and re-tooled the famed Merlin Big Block to achieve new heights in performance and ease of use for engine builders and racers. Starting with all new foundry tooling and machining fixtures, World has made improvements to virtually every area of the new Merlin IV with the goal of producing the most technologically advanced and best performing iron BBC block available today!

New features include thicker main webs for increased strength and thicker cylinder walls which are nominally .310″ @ 4.600″ bore. In addition to the standard BBC 9.800″ and 10.200″ deck heights, new are deck heights measuring 9.500″, 9.850″ and 10.250″. These allow greater versatility for specific engine combinations. Head bolt holes are blind on all available deck heights and deck thickness is nominally .600″.

The Merlin IV is available with a 2.120″ journal for standard BBC cam and standard .842″ lifter bores, or with a 2.283″ journal for a 55mm Babbitt cam and .904″ lifter bores. Cam journals up to 2.480″ or 60mm Babbitt and 1.060″ lifter bores can be accommodated, but are not stocked by World Products. World also has increased the volume in the priority main oiling system and added a front oil feed for dry sump systems, and relocated the lifter oil feeds and restrictor provisions to the front of the block.

The new block features siamese cylinder bores in 4.245″, 4.495″ or 4.595″ which finish at 4.250″, 4.500″ and 4.600″ respectively. Water jackets have been further enlarged for better cooling capacity. Nodular iron or 1045 billet steel 4-bolt main caps are standard and feature dual register to prevent cap walk. High strength 1/2″ ARP fasteners are employed to secure the main caps, with bolts used on the nodular caps and studs for the billet caps.

Cast and machined in ISO 9000 certified facilities, the Merlin IV is 100% American made and subject to stringent quality assurance procedures to ensure superior quality and performance. This new block is sure be a favorite among racers and professional engine builders.

Part # Deck Bore cam main cap Lifter bore rear seal

091100 9.800 4.245 STD Nodular .842 2 PC

091101 9.800 4.495 STD Nodular .842 2 PC

091102 9.800 4.595 STD Nodular .842 2 PC

091107 9.850 4.595 STD Nodular .842 2 PC

091110 10.200 4.245 STD Nodular .842 2 PC

091111 10.200 4.495 STD Nodular .842 2 PC

091112 10.200 4.595 STD Nodular .842 2 PC

095000 9.800 4.245 STD Billet .842 2 PC

095010 9.800 4.495 STD Billet .842 2 PC

095012 9.800 4.595 STD Billet .842 2 PC

095013-55 9.500 4.595 55mm Babbit Billet .904 2 PC

095017 9.850 4.595 STD Billet .842 2 PC

095100 10.200 4.245 STD Billet .842 2 PC

091110 10.200 4.495 STD Billet .842 2 PC

091110-55 10.200 4.495 55mm Babbit Billet .904 2 PC

091112 10.200 4.595 STD Billet .842 2 PC

091112-55 10.200 4.595 55mm Babbit Billet .904 2 PC

095117 10.250 4.595 STD Billet .842 2 PC

091090 9.800 4.120 STD Nodular .842 2 PC

 

For more information contact World Products.

877-630-6651 ~ www.worldproducts.net

 


  • Share This
  • Pinterest
  • 0

One thought on “The New Merlin IV Is The Block You Need To Build A Stout 427 to 632+ Cubic Inch Big Block Chevy

Comments are closed.