Announcement

Collapse
No announcement yet.

Project Mustang Consolidation

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Re: Project Mustang Consolidation

    Picked up .04 in the 1/8 and .08 in the 1/4Click image for larger version

Name:	IMG_20190107_191659_293.jpg
Views:	1
Size:	1.63 MB
ID:	1226971
    Crank, Dan Barlow and BBR like this.
    http://www.bangshift.com/forum/forum...-consolidation

    Comment


    • Re: Project Mustang Consolidation

      Been working on the car a little this week nothing major but it's a win for me with my lack of time and motivation lately. The starter has been grinding pretty bad. I pulled it out and the Bendix was chewed up. I had a mini stater in my stash. Got it on and over tighten the post and rung it off. I had another full size starter that will not turn with a good Bendix so I pulled the both apart and put the good Bendix on the one that turns. I really hate it when I break stuff. I normally don't care about weight all I have done is add weight to this car. For some reason I was looking forward to saving a few pounds, but I don't think the weight savings is worth the cost of a new starter if my pieced together one works.
      BBR likes this.
      http://www.bangshift.com/forum/forum...-consolidation

      Comment


      • Re: Project Mustang Consolidation

        I have had some starter issues the last few years. Mine likes to fall out and get caught by the long tube headers. Or be barely hanging on by the bottom bolt. I have no clue I tried lock washers different bolts. I was going to lock tite it but I got to the point of changing everything over to the new motor.

        Comment


        • Re: Project Mustang Consolidation

          Safety wire is your friend. Do it once and never screw with it again.

          (Until it inevitably burns out because it has to fail somehow just to annoy you....)
          Dan Barlow likes this.

          Comment


          • Re: Project Mustang Consolidation

            I don't know if its my Auto ADD or what but I have been thinking about selling the mustang. I have chosen to put most of my discretionary income in to my 401k and paying extra on the house, there for there is not a lot left for speed parts. Wanting to be able to retire early is costly!

            I am itching for a turbo car, the plan was, in three years it will be inspection exempt and I was going to put a turbo it.

            I don't want to monkey with the budget and at my current rates I will not have the cash to dump into it. If, BIG IF, I can sell it for what I have in it I think I can buy an 1984 or older car and turbo it.

            On one hand I have a running driving car, that needs very little other than more power. But I don't feel like I get to enjoy it. Right now the kids can't ride in it and JP doesn't want to. Its fun at TNT nights but I have not been to the track in 4 months. It not fast enough for any of the heads up classes, there is a foot brake bracket class I have wanted to try but have had other things so far on race day, and then the wife cost of being gone all day doing something I enjoy while she is with the kids....
            http://www.bangshift.com/forum/forum...-consolidation

            Comment


            • Re: Project Mustang Consolidation

              Those darn grown-up decisions are tough. Hard to fault anyone for wanting to retire early - it's worked out for me. Still, sorry you don't get out to play more often.

              Dan

              Comment


              • Re: Project Mustang Consolidation

                Those darn grown-up decisions are tough. Hard to fault anyone for wanting to retire early - it's worked out for me. Still, sorry you don't get out to play more often.

                Dan
                Thanks Dan, I did take it to the store last night. It was good to get it out. It really does have some good points. The cold A/C is worth alot!!!! I like the 5 speed and I am sure my budget turbo car would have a slush box.

                I am very fortunate to have all my needs, and I am old enough to not let my wants hurt me. I need to get back on the car seat latch install so a kid can ride. There is a week I will only have one rider to daycare maybe we can DD it a few days.

                http://www.bangshift.com/forum/forum...-consolidation

                Comment


                • Re: Project Mustang Consolidation

                  Russell - doubling down on your 401K and paying extra principle on the house are excellent decisions!
                  So your mustang - is it mostly what you want - just a little down on power? Even if you sold it for your parts investment - you would lose all your sweat equity!
                  Would you look forward to building another one after you retire? Would you be able to allocate funds to build another car at that time?
                  Not sure what it's value is right now or how much that lump sum would help your current plans but it might be prudent to just park it for a while as it is frequently heard from us old guys " man I wish I had kept my (insert make/model) car"
                  Deaf Bob likes this.

                  Comment


                  • Re: Project Mustang Consolidation

                    Russell - doubling down on your 401K and paying extra principle on the house are excellent decisions!
                    So your mustang - is it mostly what you want - just a little down on power? Even if you sold it for your parts investment - you would lose all your sweat equity!
                    Would you look forward to building another one after you retire? Would you be able to allocate funds to build another car at that time?
                    Not sure what it's value is right now or how much that lump sum would help your current plans but it might be prudent to just park it for a while as it is frequently heard from us old guys " man I wish I had kept my (insert make/model) car"
                    Sweat equity = education + entertainment!

                    I will be lucky to get my parts money out of it, but you never know fox body coupes are hot right now.

                    It mostly what I want. I always wanted a coupe I thought they looked better, but they really have no truck room. If I buy another one I will look for another hatch back.

                    I like the hunt for a car, like the build, and I like driving / racing. I am not much on storage.

                    My goal is to always have a "toy" if I sell this one it the money will go into another project car. I really don't know when I will retire or what my funds will be like. About that same time I will have kids in college so retirement might get pushed off.

                    I figure it's worth between 5-10k I would need closer to the high number to let it go. One of my sayings is I can't own them all at least not at the same time. I still have my first car and my first (failed) project car. But I have sold a few that could be man I wish I had keep.

                    93 Mustang GT convertible
                    93 Lincoln Mark 8
                    89 Thunderbird Supercoupe
                    88 Thunderbird Turbocoupe
                    98 Mustang GT
                    89 Mustang LX hatch (already miss this one)
                    79 Mercury Capri (this car was to ruff to ever be nice but would have been cool to restore)


                    I guess have a history of sell stuff.
                    http://www.bangshift.com/forum/forum...-consolidation

                    Comment


                    • Re: Project Mustang Consolidation

                      I guess this is what I get for talking about selling it, and not reporting on the last track day. I took it a couple weeks ago and entered a bracket race. I got out in the frist round. I learned a lot had fun, but would have liked to go farther.

                      Now onto tonight. I went out to the shop and I had left the glove box door down, the light was on so I decided to let it run for a little while and charge the battery.

                      I turned on the A/C to let it run. And heard a tink sound like a wrench hit the floor. I popped the hood to check it out. All looked fine......then the high pressure a/c hose blew. Oil everywhere.

                      I guess it better today than day one of DW. Other than being old what makes a/c hoes blow?

                      I taped it up hoping to keep the moisture out. Do you think I will be ok just replacing the high pressure hose? Drier need to be replaced? What else would you recommend?
                      Last edited by Russell; June 18th, 2019, 07:33 PM.
                      http://www.bangshift.com/forum/forum...-consolidation

                      Comment


                      • Re: Project Mustang Consolidation

                        Click image for larger version

Name:	IMG_20190618_222641_001.jpg
Views:	1
Size:	787.5 KB
ID:	1246120
                        http://www.bangshift.com/forum/forum...-consolidation

                        Comment


                        • Re: Project Mustang Consolidation

                          What a mess!
                          Life is short. Be a do'er and not a shoulda done'er.
                          1983 Mustang GT 302/T5 http://www.bangshift.com/forum/forum...485-bbr-s-83gt
                          1973 F-250 BBF Turbo Truck http://www.bangshift.com/forum/forum...uck-conversion
                          1986 Ford Ranger EFI 545/C6 https://bangshift.com/forum/forum/ba...tooth-and-nail

                          Comment


                          • Re: Project Mustang Consolidation

                            Other than being old what makes a/c hoes blow?
                            Money?





                            74NovaMan likes this.
                            Of all the paths you take in life - make sure a few of them are dirt.

                            Comment


                            • Re: Project Mustang Consolidation

                              Bummer. I bet my hoses on 'Stanger should be replaced before I drive him. Good reminder.

                              Dan

                              Comment


                              • Re: Project Mustang Consolidation

                                Any time you open a refrigerant system, you should evacuate it completely before refilling it, and replace the drier. Not a DIY friendly thing to do. I would replace both hoses, then take it to a shop to have it evacuated and refilled.... you're this close to having operational AC for dragweek - you're going to really want it operational!
                                There's always something new to learn.

                                Comment

                                Working...
                                X