In their continuing pursuit to make your life easier, safer, and less coated in transmission fluid, Jiffy-tite Motorsports has released new quick connect transmission fitting kits for the venerable GM Turbo 350 and Turbo 400 transmissions that so many racers and hot rodders have in their cars and trucks. The 100% added bonus to the millions of hot rodders running 700R4 transmissions in their stuff is that those automatics carry the same thread size and pitch as the TH350 and 400, so the kits will also work with them, even though Jiffy-tite isn’t saying that yet we are! In fact, to demonstrate that fact, when we swap the new transmission into Buford T Justice, we’ll be equipping it with a Jiffy-tite kit to allow us easy, leak free connections to the transmission cooler.
If you are a racer who is constantly working on their stuff and removing components like the engine or transmission, these fittings will save you lots of time and mess, as well as frustration. We know from experience that getting a wrench on these fittings while the transmission is in the car, around headers and other stuff can be an absolute bear. Since no tools are required with Jiffy-tite fittings, it is as easy as reaching up, pulling the collar back, and removing the line. Also, Jiffy-tite’s leak free design means that you are not going to see the transmission barfing fluid everywhere in your trailer, the shop floor, the pits at the track, or the side of the road. No mess, done. Many of our readers are using this product already and we’re sure many more will now that these new applications have been unveiled. The proof is in the pudding. If you don’t take our word for it…take theirs!
Any one know for the TH2004r?