Shannon is back at the fab work on the FJ40, with the roof and dash coming along, as well as the pedals and steering in a second video. There is a lot more going on as well, but that’s the fab wwork we’re seeing in this one. There is a lot of fabrication going on in this project, so we hope it inspires you to get out there and start cutting and welding something on your ride this week.
Shannon and Jess are moving right along on the FJ40 and things just keep getting better. If you like a Landcruiser, you’ll dig this one. But if restored to factory is your jam, this one might not be quite up your alley. We dig them all, so we are in.
If you missed this FJ40 project that Shannon Campbell is working on, we’ve got a link below, but if you are back for the next installment in this build series you are in luck as well. I think this is going to be a fun project, because I love FJ40s, but if you have any ideas of building a custom chassis for your FJ or Jeep, you should check this one out.
CLICK HERE IF YOU MISSED ANY OF THE UPDATES ON THIS FJ40 PROJECT SO FAR
Video Description:
In this episode, we’ve got a little bit of everything going on at the shop before we hit the road for Jeep Beach in Daytona! Shannon has Dru in the shop and they officially kick off wiring on the ’77 Chevy K10, getting started with the Painless wiring harness and installing a Dakota Digital dash. This is a big step forward on the build and we’re excited to finally see it coming together. Over on the FJ40, Shannon stays busy building a custom roof and dash, keeping the fabrication moving right along on this build. Tyler and Zach stop by the shop to get a little work done on Zach’s truck, and while they’re at it, we put the new Seesii impact to the test. If you’ve been curious about it, we’ve got a link and discount code for you below Outside of the shop, Tyler also takes a group of hunters out to chase some turkey and spends time getting his sheds prepped and ready for sale. If you want to check out more of what he’s got going on, be sure to follow his YouTube channel @Tracks_Racks_AZ To wrap it all up, Shannon and Jess load up and officially hit the road for a long journey to Jeep Beach in Daytona, Florida! First stop… Roswell, New Mexico Let the road trip begin! Seesii Impact Link + Discount: Grab yours here: https://amzn.to/4vdpqx2 Use code: XE87RXPE Valid: April 10–30, 2026
Video Description:
We finally made it home from an unforgettable time at Jeep Beach in Daytona… but there’s no slowing down around here Shannon wastes no time getting right back to work in the shop, jumping straight into the FJ40 build. In this episode, he fabricates a custom brake pedal setup, installs the master cylinder, and modifies and mounts the steering column to keep things moving forward on this rig. It’s officially back to reality—and back to build mode We’ve got a lot coming up and this FJ40 is one step closer to hitting the road (and the trails )
