Category Archive: FORD, Hack of the Week, Metal Fabrication, Project Cars, TECH, Tech Stories, Videos
Iron Trap’s Hidden 1938 Ford Convertible Hot Rod: Building A Hood Latch For The 1938 Ford Convertible From VW Parts!
With all the work that has gone into this thing to make it run and drive for the first time in 50 years, it is great to see that the IronTrap boys are also making sure it looks like the hot rod that...
DIY Hi Tech Hydraulic Press Brake Project: PART 2 – Making An Adjustable Backstop Using A Linear Actuator
Here’s Part 2 of the cool DIY Hydraulic Press Brake. Keep in mind, this isn’t just a simple press brake. It’s got automation, production capabilities, and more but it’s a DIY...
DIY Hi Tech Hydraulic Press Brake Project: PART 1 – Making Repeatable Bends On Your Own, Using Your Own Press Brake With Limit Switches
I’ve never owned a sheet metal brake, but I’ve always wanted one. But even more than a sheet metal brake, I’d like a hydraulic press brake so I can bend my own brackets and such....
Newbern Body Swaps His Postal Jeep! Putting A Newer TJ Chassis Under This Mail Jeep Will Make It Way Better Than Ever!
Postal Jeeps, aka Jeep DJs, were two wheel drive units that were marketed as light delivery vehicles starting in 1955 and continuing through the mid 1980s. There was even a time when a convertible...
Will It RUN AND DRIVE Finally? Vice Grip Garage Debates Between A Carburetor or Computer On This 8-6-4 Cadillac Nightmare.
Not long ago, we ran video as Derek tried to make this 1981 Caddy run. It wasn’t a great experience, as these things were always a challenge with their 4-6-8 engine. If you missed that first...
Shop Organization: Adam Savage Builds His Dream Hardware Storage System Like Only He Does!
Every Mythbusters fan on the planet knows Adam Savage and knows that he’s a pretty sharp, and incredibly creative, guy who thinks outside the box sometimes. If you aren’t familiar with...
Modern Tech With Classic Style: How to modify a Jeep Wrangler Frame for a Scout Body With Ian Johnson’s Big Tire Garage.
For decades, off-roaders have been building new suspension systems under old rigs, and have been doing engine swaps as well. And in the hot rodding world folks have been doing the same thing, but...
DIY Wheel Painting Tech: How To Paint Your Wheels For Cheap, But With Professional Results!
While paint has changed a ton in the last 20 years, it is still intimidating to paint certain parts for your project car or truck. Frames and suspension parts are generally no big deal, whether you...
DD Speed Shop’s FORGOTTEN First Generation Camaro: Nothin But NEW METAL! – This Makes It A Rust Free 1967 Camaro Right?
Dan is back at it with another Camaro update. He’s run out of parts so other stuff is on order, so he’s deciding on what can go under the hood. When you get a Camaro project, you care a...
Chevrolet S10 Electric Parked 25 Years! Can We Make It Drive Again? And What Engine Should Go In It Next?
This one was a weird one for Jared, but he digs it because the story is pretty impressive. And if you missed the story of getting this little truck, and its history, we encourage you to use the link...
DIY Magnetic Welding Clamps Build! Do These Magnetic Clamps Replace A Fixture Table?
If you are like me, then you dream of having one of those super bad ass fixture tables like those available from Fireball Tools and several others. But those suckers are not cheap, and by that I mean...
ULTRA CHEAP (PUMP GAS) JUNKYARD LS BLOWER TEST-THE GEN 3 V6 M90 MAKES SERIOUS TORQUE ON THE V8 LS!
Richard is back at it and the people have spoken! Because everyone wants to know what these power adders can do on pump gas, since most folks looking for dirt cheap boost aren’t looking to...
Will This Tik Tok Brake Rotor Surfacing Hack Actually Work? Or Will It Rip Off All Kinds Of Important Junk?
We all laugh at the dumb stuff that we see on the internet, especially those that we “know” will never work and probably cause something or someone to be hurt. It’s human nature....
Fiberglass How-To: Using Foam And Glass To Form A Custom Dash For A 1967 C10 Pickup. Mockup And Design Are Not As Hard As You Might Think!
I happened upon this video series the other day and knew I had to share it. After recently posting a video of Brent at Halfass Kustoms doing a Pontiac dash swap in a ’53 GMC pickup, this 1967...