I’ve always wanted a roll bender to add to my selection of tools but to get one that will really bend a lot of different materials you’ll have to spend some money. A cheap one just for round tubing can be had for a couple of hundred bucks, but it will cost you $400 or more to also be able to roll bend square or rectangular tubing. This one here will bend them all if you want it to and is especially good at square and rectangular tubing. With a simple wheel change, it would be really good at round tubing as well, so check out this roll bender build and let us know if you would make one yourself. If you do want to go build one for yourself the plans for this one are available at the link below.

Video Description:

Plans: https: https://www.etsy.com/de/listing/10280… As always, I had an idea and then just started building. Another attachment for my welding table. On this white it is also very space-saving. Of course, I could have built the rollers in such a way that they can be easily changed, that you can also bend profiles with different discs. You could also change afterwards. But I wanted something simple and fast to bend something around. I also need this machine for my next projects.